Counter - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:
Table of Contents

Advertisement

1155SBS050404A

4) Counter

This function maintains the counts of the various counters, thus aiding the Tech. Rep. in performing
service jobs.
<Setting Procedure>
1. Touch [Counter] to open the Counter menu screen.
2. Touch the desired subfunction key to open the corresponding counter setting screen.
3. To clear a count, touch [Counter Reset], the key of the counter to be cleared, and [End].
Note: Two or more counters can be selected.
Touch Panel Display
Paper
MJ
Tech. Rep. Mode
Shows the number of sheets of paper used by the size and type.
Display
Description
A3
A3 (L)
B4
B4 (L)
A4
A4 (L,C)
B5
B5 (L,C)
A5
A5 (L,C)
B6
B6 (L)
A6
A6 (L)
<Clearing a Count>
Select the count to be cleared by touching the corresponding item key
shown on the Touch Panel (A3, B4, ...) and press the Clear key.
If a count is accidentally cleared, pressing the Interrupt key will undo the
clear operation.
1) This function allows the Tech. Rep. to set the number of copies to be
made before the Maintenance Call reminder is given the next time.
2) It shows the current count value and the above setting. Each counter
may be reset to 0 independently of each other.
3) When the count reaches the preset value, the Maintenance Call
reminder (M1) is given.
Note: When "Call Indicated" is selected for "Maintenance Call" available
from Tech. Rep. Choice.
Display
Maint.-Set
Maint.-Count
<Setting a Count>
1. Touch [Maint.-Set] and then press the Clear key to clear the count. If the
count is accidentally cleared, pressing the Interrupt key will undo the
clear operation.
2. Enter the desired value from the 10-Key Pad.
<Clearing a Count>
Touch [Maint.-Count] and then press the Clear key to clear the count. If
the count is accidentally cleared, pressing the Interrupt key will undo the
clear operation.
S-33
Counter
Operation
Display
Description
11×17
11×17 (L)
11×14
11×14
Letter
Letter (L,C)
Legal
Legal (L,C)
5½×8½
5½×8½ (L,C)
FLS
FLS
Not 2-Sided
Not 2-Sided
Description
The Maintenance Call reminder is given when the
count reaches the preset value.
Counts one for each copy made.
Display
Description
Normal
Normal
Recycled
Recycled
Cover
Cover
Insert
Insert
Cover &
Cover &
Insert
Insert

Advertisement

Table of Contents
loading

Table of Contents