Paper Auto Detection; Paper Size Detection; Paper Type (1St Tray); Paper Type (Bypass Tray) - Minolta Di152 User Manual

Using the Utility Mode
darker the image with "0" as the central value.
G The default value is "0."

Paper Auto Detection

Select "Inch" if the size of the paper loaded in each tray is designated
according to the inch system, such as Letter. Select "Metric" if the size of
the paper loaded in each tray is designated according to the metric
system, such as A4 and B4.
G The default value is "Inch."

Paper Size Detection

Select whether to "automatically detect" or "input size" for the paper
loaded in the 1st Tray.
G The default value is "Automatic detection."

Paper Type (1st Tray)

Select the type of paper loaded in the 1st Tray from among "plain paper,"
"cards," or "OHP transparencies."
G The default value is "plain paper."

Paper Type (Bypass Tray)

Select the type of paper loaded in the Bypass Tray from among "plain
paper," "cards," or "OHP transparencies."
G The default value is "plain paper."

Special Paper Setting

All trays can generally be chosen for the Auto Paper mode. This
sometimes results in a situation in which a tray loaded with special paper
is selected for a job, which is not intended by the user. Therefore, a
particular tray, if designated for special paper, can be excluded from Auto
Paper selection.
This function also allows you to specify if the designated tray is subject to
Auto Tray Switching.
Auto Paper disabled, Auto Tray Switching disabled:
Select this option for paper that is to be used only for special purposes,
such as "colored paper" and "paper printed with a company logo."
Auto Paper disabled, Auto Tray Switching enabled:
Select this option in cases where "you give priority to plain paper for use,"
but "you want an uninterrupted copy cycle to use recycled paper even
when plain paper runs out."
G The default value is "Auto Paper enabled (special paper setting OFF)."
Di152/Di183
7
7-9