Minolta Di 620 Manual page 404

6. Use the 10-key Pad to change the setting value.
Setting Instructions
If width A is longer than the specifications, make the setting value smaller than the current one.
If width A is shorter than the specifications, make the setting value greater than the current one.
1) Use the following equation to find the setting value:
Specification (5.0 mm) - measurement = setting value
2) If a single adjustment procedure does not successfully bring width A into the specified range, try
another setting value.
7. Touch the [Enter] key to validate the setting value.
Caution
Be sure to touch the Enter key before returning to the normal operation mode. If the Panel Reset
Key is used, the previous setting remains valid.
8. Using the same procedure, adjust for 600 dpi.
4
7
1155D197CA
D-93
3
5 6
8 9
0 C
Use to clear the setting value.
Use to enter the setting value.
Use to chage the + or - sign.
1155D189CA
1155D189CA