Minolta Di 620 Manual page 370

1161D023AA
11. Remove two screws and the cover.
12. Remove two screws and the rear harness cover.
1155D098AA
13. Remove two screws and the heater lamp holder (rear).
14. Unplug one connector.
1155D099AA
15. Remove one screw and the front harness cover.
16. Remove one screw and the heater harness.
1155D117AA
17. Go to the rear of the Fusing Unit and slide out the Lower
Fusing Roller Heater Lamp.
NOTE
When reinstalling the Lower Fusing Roller Heater Lamp,
make sure that its end on which its rating is shown is at
the rear.
1155D100AA
18. Loosen the roller pressure springs at the front and rear to
free the Lower Fusing Roller.
NOTE
The illustration shows only the front end. Be sure also to
loosen the spring at the rear.
D-59