Minolta Di 620 Manual page 410

If the loop length falls outside the specified range, perform the following adjustment steps.
4. Call the Tech. Rep. mode to the screen.
5. Touch [Tech. Rep. Choice] and [Printer], in that order.
6. Touch [Loop Adjustment].
7. Use the 10-key Pad to change the setting value.
Setting Instructions
If loop length A is longer than the specifications, make the setting value smaller than the current one.
If length A is shorter than the specifications, make the setting value greater than the current one.
• If a single adjustment procedure does not successfully bring length A into the specified range, try
another setting value.
8. Touch the [Enter] key to validate the setting value.
Caution
Be sure to touch the Enter key before returning to the normal operation mode. If the Panel Reset
Key is used, the previous setting remains valid.
4
7
1155D203CA
D-99
3
5 6
8 9
0 C
Use to clear the setting value.
Use to enter the setting value.
Use to chage the + or - sign.
1155D189CA
1155D189CA