8. Use the 10-key Pad to change the setting value.
Setting Instructions
If width A/B on the copy of the test chart is longer than the specifications, make the setting value
smaller than the current one.
If width A/B is shorter than the specifications, make the setting value greater than the current one.
• If a single adjustment procedure does not successfully bring width A/B into the specified range, try
another setting value.
9. Touch the [Enter] key to validate the setting value.
Caution
Be sure to touch the Enter key before returning to the normal operation mode. If the Panel Reset
Key is used, the previous setting remains valid.
4
7
1155D193CA
D-103
3
5
6
8
9
0
C
Use to clear the setting value.
Use to enter the setting value.
1155D190CA
1155D190CA