Minolta DI1611 User Manual
  1. Manuals
  2. Brands
  3. Minolta Manuals
  4. Copier
  5. Di1611
  6. User manual

Minolta DI1611 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
www.konicaminolta.net
Di1611/Di2011

Advertisement

Table of Contents
loading

Related Manuals for Minolta DI1611

Summary of Contents for Minolta DI1611

  • Page 1 User Manual www.konicaminolta.net Di1611/Di2011...

  • Page 2: Table Of Contents

    Precautions Installation Precautions..............2-2 Installation Site ................2-2 Power Source ................2-2 Space Requirements ..............2-3 Operation Precautions..............2-4 Operating Environment...............2-4 Proper Use .................2-4 Transporting the Machine............2-5 Care of Machine Supplies ............2-5 Storage of Copies...............2-6 Legal Restrictions on Copying ............2-7 Components and Their Functions..........2-8 Di1611/Di2011...
  • Page 3 To position sheet documents ........... 3-11 To position translucent or transparent documents....3-13 To position a book..............3-15 To load documents of mixed sizes........... 3-16 Stopping/Restarting/Canceling a Copy Job......3-18 Confirmation Mode..............3-19 To check the counters.............. 3-20 Reducing Electricity Usage ............3-22 Di1611/Di2011...
  • Page 4 To make copies using the Auto Paper function ......5-22 To copy with a manually selected paper size ......5-23 To load special paper into the 1st Tray ........5-24 Automatically Selecting the Paper Source .......5-25 Order for Automatically Switching Paper Drawers ....5-26 Di1611/Di2011...
  • Page 5 Erasing Sections of Copies ............6-15 Precautions on the Erased Margin Location ......6-15 To make copies using an Erase setting ........6-16 Negative/Positive Inverted Copying ......... 6-17 To make copies using the negative/positive inverted copy function ..................6-17 Di1611/Di2011...
  • Page 6 To select the “ADMIN. MANAGEMENT” menu ......7-27 To set the “AUTO SHUT OFF” function........7-28 To turn on/off user (section) management .......7-30 To register user (section) access numbers ......7-31 To change/delete user (section) access numbers....7-33 To display/clear the total count for a specific account ....7-35 Di1611/Di2011...
  • Page 7 When the Message “ORIGINAL DOC.JAM” Appears ....8-13 To clear a misfeed in the Automatic Document Feeder (AF-12) ..................8-13 To clear a misfeed in the Duplexing Document Feeder (AFR-19) .................. 8-16 Main Error Messages and Their Remedies ......8-18 Di1611/Di2011...
  • Page 8 Housing ..................10-7 Original Glass ................10-7 Document Pad................10-7 Control Panel................10-8 10.3 Function Combination Table............10-9 Function Combination Table for Di1611 ........10-9 Function Combination Table for Di2011 .........10-10 Function Combination Codes ..........10-10 10.4 Paper Size and Zoom Ratio Tables .........10-11 Copy Paper Sizes..............10-11 Zoom Ratios ................10-12...
  • Page 9 Contents viii Di1611/Di2011...

  • Page 10: Introduction

    Introduction...

  • Page 11: Introduction

    Note that some of the illustrations of the machine used in the User Manual may be different from what you actually see on your machine. Di1611/Di2011...

  • Page 12: Explanation Of Manual Conventions

    Text formatted in this style provides additional assistance. ➜ Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di1611/Di2011...

  • Page 13: Explanation Of Basic Concepts And Symbols

    During printing, paper is supplied from the right side of the machine and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. Di1611/Di2011...

  • Page 14: Width" And "Length

    (Y), the paper has a vertical or portrait orientation, indicated by either “L” Crosswise ( If the width (X) of the paper is longer than the length (Y), the paper has a horizontal or landscape orientation, indicated by either “C” or Di1611/Di2011...

  • Page 15: Energy Star

    ® switch to a “low-power mode” after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Di1611/Di2011...

  • Page 16: Safety Information

    This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Di1611/Di2011...

  • Page 17: Warning

    Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Connect the power cord to an electrical outlet that is equipped with a grounding terminal. Di1611/Di2011...

  • Page 18: Caution

    Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Di1611/Di2011...

  • Page 19: Precautions For Routine Use

    This declaration is valid for the area of the European Union. This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under EU directives. 1-10 Di1611/Di2011...

  • Page 20: Laser Safety

    The laser diode and the scanning polygon mirror are incorporated in the print head unit. The print head unit is NOT A FIELD SERVICE ITEM: Therefore, the print head unit should not be opened under any circumstances. Laser Aperture of the Print Head Unit Print Head Di1611/Di2011 1-11...
  • Page 21 Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 5mW og bølgelængden er 770-795 nm. For Finland, Sweden Users LOUKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. 1-12 Di1611/Di2011...
  • Page 22 Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og bølgelengde er 770-795 nm. Di1611/Di2011 1-13...

  • Page 23: Laser Safety Label

    Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil. 1-14 Di1611/Di2011...
  • Page 24 1.5 Safety Information Acoustic Noise For European Users Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A). Di1611/Di2011 1-15...
  • Page 25 1.5 Safety Information 1-16 Di1611/Di2011...

  • Page 26: Precautions

    Precautions...

  • Page 27: Installation Precautions

    A location that is not near any kind of heating devices Power Source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% Frequency fluctuation: Maximum ±3 Hz ❍ Use a power source with as little voltage or frequency fluctuations as possible. Di1611/Di2011...

  • Page 28: Space Requirements

    2.1 Installation Precautions Space Requirements To ensure easy machine operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. <Di1611> 1099 1024 *100 **400 <Di2011> 1099 1069 **400 *100 Unit: mm Note Since there is a ventilation duct on the left side of the machine, be sure to allow a clearance of *100 mm or more on the left side.

  • Page 29: Operation Precautions

    Always make sure that the machine’s power plug is visible and not hidden by the machine. ✚ Always unplug the machine from the electrical outlet if the unit is not to be used for a long period of time. ✚ Always provide good ventilation when making a large number of continuous copies. Di1611/Di2011...

  • Page 30: Transporting The Machine

    Store in a sealed plastic bag in a cool, dark place paper that has been removed from its wrapper but not loaded into the machine. Only use toner that has been manufactured specifically for this machine. Never use other types of toner. Keep all supplies out of the reach of children. Di1611/Di2011...

  • Page 31: Storage Of Copies

    Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Di1611/Di2011...

  • Page 32: Legal Restrictions On Copying

    Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Di1611/Di2011...

  • Page 33: Components And Their Functions

    (optional) Paper Feed Unit PF-126 Equipped with a paper drawer that can supply 250 sheets of (optional: Di1611 Up to one, paper, for upper paper feed unit only. Di2011 Up to four) Also referred to as the “Paper Feed Unit” throughout the manual.
  • Page 34 Windows or a NetWare network environment is possible. Shifting Unit Shifts copies and printed pages that are fed out. If the Job OT-103 (optional)* Separator is installed, the Shifting Unit cannot be attached. * The internal options are not shown. Di1611/Di2011...

  • Page 35: Part Names And Their Functions

    2.5 Part Names and Their Functions Part Names and Their Functions Main Unit 2-10 Di1611/Di2011...
  • Page 36 When manually feeding a document, position it on the Original Glass so that it can be scanned. Position the document face down on the glass. (p. 3-11) Control Panel Used to start copying or to make various settings. (p. 2-17) Di1611/Di2011 2-11...

  • Page 37: Inside Of Main Unit

    Creates the copy image. Replacement of the Imaging Unit must be performed by a service representative. Toner Bottle Holder Opened when replacing the toner bottle. Pressure Lever Used when clearing paper misfeeds in the fusing unit. (p. 8-5) 2-12 Di1611/Di2011...

  • Page 38: Document Feeder (Optional)

    Document Guide Plate Adjusted to the width of the document. (p. 3-9) Document Feeder Cover Opened when clearing document misfeeds. (p. 8-13) (Doc. Feed Cover) Document Feeder Tray Holds the documents to be scanned; load documents face up. (p. 3-9) Di1611/Di2011 2-13...

  • Page 39: Multiple Bypass (Optional)

    2.5 Part Names and Their Functions Multiple Bypass (Optional) Part Name Description Bypass Tray Holds up to 100 sheets of plain paper, 20 sheets of special paper, or 10 envelopes. (p. 5-10) Bypass Tray Extender Pulled out when large-sized paper is loaded. 2-14 Di1611/Di2011...

  • Page 40: Paper Feed Unit (Optional)

    2nd Tray Holds up to 250 sheets of plain paper. With the Di2011, up to four Paper Feed Units can be installed. 3rd Tray With the Di1611, one Paper Feed Unit can be installed. 4th Tray 5th Tray Side Cover Opened when clearing paper misfeeds.

  • Page 41: Job Separator (Optional)

    Job Separator (Optional) With the Job Separator installed Part Name Description Copy Tray Lamp Lights up when paper is left in the Upper Copy Tray after printing. Upper Copy Tray Collects computer printouts. Lower Copy Tray Collects copies. 2-16 Di1611/Di2011...

  • Page 42: Names Of Control Panel Parts And Their Functions

    • With each press, a zoom ratio between 0.50 and 2.00 is selected in 0.01 increments. • Used to specify the selection above or below in setting screens and menus. [Paper] key Used to select the size of the paper to be printed on. Di1611/Di2011 2-17...
  • Page 43 • Copy programs can be stored. • Stored copy programs can be selected and recalled. [Book Separation] key Used to select the “Book Separation” function. [Original] key Used to select between the “Duplex Orig.” function and the “Mixed Orig.” function. 2-18 Di1611/Di2011...
  • Page 44 10-Key Pad • Used to specify the number of copies. • Used to enter setting values. • The [ ] and [#] keys do not function on this machine. Di1611/Di2011 2-19...

  • Page 45: Display Indications

    “AUTO” or the current zoom ratio setting is displayed. “ [X/Y]” indicates that the “X/Y Zoom” function is selected. Menu or function name • Displays the current menu, function or settings. • Error messages are displayed when errors occur. Messages Displays messages such as operating instructions. 2-20 Di1611/Di2011...

  • Page 46: Adjusting The Angle Of The Display

    The display can be adjusted to any of three angles. Adjust the display to the angle that allows for easy operation. ➜ Press an edge of the display to adjust it to the desired angle. Middle position Upper position Lower position Di1611/Di2011 2-21...

  • Page 47: Power Supply

    Copy density: AUTO Zoom ratio: Full size (× 1.00) Paper source: AUTO (with the Document Feeder installed) Finishing function: Non-sort The default settings can be customized using the functions in the Utility mode (“7 Utility Mode – Copy Functions”). 2-22 Di1611/Di2011...

  • Page 48: Auto Panel Reset

    (preheat mode) function” on page 7-8.) Auto Shut Off With the Auto Shut Off function, the machine automatically turns off if no operation is performed for a specified length of time, in order to conserve energy. (Manufacturer’s default setting: 30 minutes) Di1611/Di2011 2-23...

  • Page 49: Queued Copy Jobs

    Copy jobs can be queued by loading the document and pressing the [Start] key while “∗PLEASE WAIT!∗” appears in the display. When the indicator on the [Start] key lights up in green, scanning of the loaded document begins, and copies are produced. 2-24 Di1611/Di2011...

  • Page 50: Basic Operations

    Basic Operations...

  • Page 51: Making Copies

    Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies. ❍ The number of copies can be set to any number between 1 and 99. ❍ To clear the entered value, press the [No] key. Di1611/Di2011...
  • Page 52 3.1 Making Copies Press the [Start] key. The set number of copies are made. ❍ To stop copying before the set number of copies have been made, press the [Stop] key. Di1611/Di2011...

  • Page 53: Loading Paper

    Make sure that the paper guides are pushed up against the edges of the paper. We recommend replenishing the paper only after all of the paper in the drawer has been used. Di1611/Di2011...

  • Page 54: Loading Paper Into The Paper Tray

    (the side facing up when the package was unwrapped) faces up. Have the necessary precautions been observed when loading the paper? ➜ Do not load so much paper that the top of the stack is higher than mark. Di1611/Di2011...
  • Page 55 3.2 Loading Paper Slide the paper guides against the edges of the paper. Is the paper guide positioned correctly? ➜ Make sure that the paper guides are pushed up against the edges of the paper. Close the 1st Tray. Di1611/Di2011...

  • Page 56: To Load Paper Into The 2Nd Tray

    (the side facing up when the package was unwrapped) faces up. Have the necessary precautions been observed when loading the paper? ➜ Do not load so much paper that the top of the stack is higher than mark. Di1611/Di2011...
  • Page 57 3.2 Loading Paper Slide the paper guides against the edges of the paper. Is the paper guide positioned correctly? ➜ Make sure that the paper guides are pushed up against the edges of the paper. Close the 2nd Tray. Di1611/Di2011...

  • Page 58: Loading The Document

    Do not load so many pages that the top of the stack is higher than mark. Adjust the Document Guide Plates to fit the size of the document. Note Be sure to load the document correctly, otherwise the pages may not be fed in straight. Di1611/Di2011...
  • Page 59 3.3 Loading the Document If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. 3-10 Di1611/Di2011...

  • Page 60: With The Original Glass

    Original Glass. Carefully close the Original Cover, or the Automatic Document Feeder if it is installed. If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Di1611/Di2011 3-11...
  • Page 61 3.3 Loading the Document Press the [Start] key. 3-12 Di1611/Di2011...

  • Page 62: To Position Translucent Or Transparent Documents

    Align the document on the scales above and to the left of the Original Glass. Place a blank sheet of paper of the same size over the document. Carefully close the Original Cover, or the Document Feeder if it is installed. Di1611/Di2011 3-13...
  • Page 63 3.3 Loading the Document If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. 3-14 Di1611/Di2011...

  • Page 64: To Position A Book

    Carefully close the Original Cover, or the Document Feeder if it is installed. Press the [Book Separation] key. The “Book Separation” indicator lights If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011 3-15...

  • Page 65: To Load Documents Of Mixed Sizes

    Load the document pages to be copied face up. Have the necessary precautions been observed when loading the document? ➜ A maximum of 50 document pages can be loaded. (With AF-12) ➜ A maximum of 80 document pages can be loaded. (With AFR-19) 3-16 Di1611/Di2011...
  • Page 66 Press the [Original] key twice. The “Mixed Orig.” indicator lights up. Press the [Auto Paper/Auto Size] key until the Auto Paper function is selected. ❍ Check that “AUTO” appears in the bottom line of the screen. Press the [Start] key. Di1611/Di2011 3-17...

  • Page 67: Stopping/Restarting/Canceling A Copy Job

    [Start] key. Printing continues. <Cancel> How can the stopped job be canceled? ➜ When the message “PRESS THE START KEY TO RESUME” appears, press the [No] key. The message “∗COPY CANCELED∗” appears, and the job is canceled. 3-18 Di1611/Di2011...

  • Page 68: Confirmation Mode

    (The paper size that is counted should be set by the service representative.) TOTAL SCAN This count shows the total number of scans made since this machine was installed. However, the number of pages scanned while making copies is not included. Di1611/Di2011 3-19...

  • Page 69: To Check The Counters

    3.5 Confirmation Mode To check the counters Press the [Status] key, and then press the [Yes] key. The machine counter menu appears. Using the keys, select the counter that you wish to check. 3-20 Di1611/Di2011...
  • Page 70 3.5 Confirmation Mode Press the [Yes] key. The “TOTAL PAGE?” appears. Press the [No] key. The main screen appears. Di1611/Di2011 3-21...

  • Page 71: Reducing Electricity Usage

    [Yes] key. ❍ The timer can be set between 15 min and 240 min. ❍ If you wish to correct the setting, press the [No] key, and then enter the new number. 3-22 Di1611/Di2011...
  • Page 72 If the “AUTO SHUT OFF” function in the “ADMIN.MANAGEMENT” menu is set to “ENABLE”, the screen shown at the right appears. Press the keys to select “ON”, and then press the [Yes] key. Press the [No] key. The main screen appears. Di1611/Di2011 3-23...
  • Page 73 3.6 Reducing Electricity Usage 3-24 Di1611/Di2011...

  • Page 74: Useful Operations

    Useful Operations...

  • Page 75: Specifying A Zoom Setting

    If “AUTO” is not displayed, press the [Paper] key until “AUTO” is displayed. ❍ For details on changing the paper size setting for the paper tray, refer to “Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)” on page 7-16. Di1611/Di2011...
  • Page 76 4.1 Specifying a Zoom setting If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. Di1611/Di2011...

  • Page 77: Using The "Auto/Photo" Function

    Refer to “Loading the Document” on page 3-9. Press the [Auto/Photo] key. ❍ Select either “PHOTO” or “TEXT/ P”. Press the key to adjust the density. ❍ Select the appropriate density for the color and density of the text and paper of the document. Di1611/Di2011...
  • Page 78 If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. Di1611/Di2011...

  • Page 79: Copying Onto Various Types Of Media

    Adjust the paper guides in the 1st Tray, and load the OHP transparencies. ❍ Load OHP transparencies in the same orientation as the document. Note A maximum of 20 OHP transparencies can be loaded. Press the [Utility] key twice. The “PAPER SOURCE SETUP” menu appears. Di1611/Di2011...
  • Page 80 The main screen appears. Press the [Paper] key to select the paper loaded into the 1st Tray. If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011...

  • Page 81: To Copy Onto Label Sheets

    Load label sheets so that the surface to be printed on faces upward, as shown in the illustration. Press the [Utility] key twice. The “PAPER SOURCE SETUP” menu appears. From the 10-Key Pad, press the [2] key. “TRAY1 PAPER” appears. Di1611/Di2011...
  • Page 82 The width of the paper (y) can be set between 90 mm and 297 mm. ❍ To correct the entered value, press the [No] key. Press the [No] key. The main screen appears. Press the [Paper] key to select the paper loaded into the 1st Tray. Di1611/Di2011...
  • Page 83 4.3 Copying Onto Various Types of Media If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. 4-10 Di1611/Di2011...

  • Page 84: To Copy Onto Envelopes (Non-Standard Size)

    Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed. With the Manual Bypass, only one envelope can be loaded at a time. Di1611/Di2011 4-11...
  • Page 85 Using the 10-Key Pad, type in “200” for the length (X), and then press the [Yes] key. ❍ The length of the paper (x) can be set between 140 mm and 432 mm. ❍ To correct the entered value, press the [No] key. 4-12 Di1611/Di2011...
  • Page 86 The main screen appears. If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. Di1611/Di2011 4-13...

  • Page 87: To Copy Onto Postcards

    Note Load postcards so that the surface to be printed on faces downward. With the Manual Bypass, only one postcards can be loaded at a time. Press the [No] key. The “PAPER SOURCE SETUP” menu appears. 4-14 Di1611/Di2011...
  • Page 88 The length of the paper (x) can be set between 140 mm and 432 mm. ❍ To correct the entered value, press the [No] key. Refer to the diagram at the right and be sure to specify the paper width and length measurements correctly. Di1611/Di2011 4-15...
  • Page 89 The main screen appears. If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. Note When making copies using the Manual Bypass, continue loading paper into the tray. 4-16 Di1611/Di2011...

  • Page 90: Before Making Copies

    Before Making Copies...

  • Page 91: Paper

    The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th paper drawer and the Multiple Bypass are optional. If the optional Duplex Unit is used to make double-sided copies, only plain and recycled paper can be used. Di1611/Di2011...

  • Page 92: Paper Sizes

    The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th paper drawer and the Multiple Bypass are optional. If the optional Duplex Unit is used to make double-sided copies, only plain and recycled paper can be used. Di1611/Di2011...

  • Page 93: Paper Capacity

    The 2nd paper drawer, the 3rd paper drawer, the 4th paper drawer, the 5th paper drawer and the Multiple Bypass are optional. If the optional Duplex Unit is used to make double-sided copies, only plain and recycled paper can be used. Di1611/Di2011...

  • Page 94: Unsuitable Paper

    Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Curled or wrinkled paper Art paper, coated paper or inkjet printer paper Di1611/Di2011...

  • Page 95: Print Area

    For details on using the machine to print from a computer when the printer controller is installed, refer to the Printer Controller User Manual. Paper output direction A: 4 mm (at full size) B: 4 mm (at full size) C: 4 mm (at full size) Di1611/Di2011...

  • Page 96: Paper Storage

    Not exposed to a flame ❍ Not exposed to high humidity ❍ Not extremely dusty Unwrapped paper should be placed in a plastic bag and stored in a cool, dark location. Keep paper out of the reach of children. Di1611/Di2011...

  • Page 97: Making Copies On Manually Fed Paper

    Note When copying using the Manual Bypass, only one page at a time can be loaded. For details on the number of pages that can be loaded into the Multiple Bypass (optional), refer to “Paper Capacity” on page 5-4. Di1611/Di2011...

  • Page 98: Adjusting The Multiple Bypass

    5.4 Making Copies on Manually Fed Paper Adjusting the Multiple Bypass Adjust the Bypass Tray Extender to fit the size of the paper as shown below. Di1611/Di2011...

  • Page 99: Loading Paper Into The Bypass Trays

    Load the paper so that the front side of the paper faces down. ➜ Make sure that the paper is not curled (rolled). Adjust the Bypass Tray Extender and the paper guides to fit the size of the paper. 5-10 Di1611/Di2011...

  • Page 100: Loading Special Paper Into The Bypass Trays

    Note Do not load postcards crosswise. After you have loaded the postcards, use the control panel to specify the paper size and paper type for the Bypass Tray. Di1611/Di2011 5-11...

  • Page 101: To Load Envelopes

    After you have loaded the envelopes, use the control panel to specify the paper size and paper type for the Bypass Tray. 5-12 Di1611/Di2011...
  • Page 102 5.4 Making Copies on Manually Fed Paper Note Do not load envelopes crosswise. Do not load envelopes with the flap facing down. Do not load envelopes with the flap facing backwards. Di1611/Di2011 5-13...

  • Page 103: To Load Ohp Transparencies

    Up to 20 sheets of paper can be loaded into the Multiple Bypass. ➜ When loading OHP transparencies, load them in the same orientation as the document. Note After you have loaded the transparencies, use the control panel to specify the paper size and paper type for the Bypass Tray. 5-14 Di1611/Di2011...

  • Page 104: To Load Label Sheets

    When loading label sheets, load them in the same orientation as the document. Place documents with the side to be printed facing down. Note After you have loaded the label sheets, use the control panel to specify the paper size and paper type for the Bypass Tray. Di1611/Di2011 5-15...

  • Page 105: Copying Onto Manually Fed Paper

    The “PAPER SOURCE SETUP” menu appears. Use the keys to select the type of paper loaded. ❍ Select from the following four paper type settings. “PLAIN” “OHP” “CARD” “ENVELOPE” Press the [Yes] key. The “PAPER SIZE” menu appears. 5-16 Di1611/Di2011...
  • Page 106 ➜ your service representative. Press the [Yes] key. The main screen appears. If necessary, specify any other copy settings. ❍ Zoom (p. 5-30) ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. Di1611/Di2011 5-17...
  • Page 107 To make continuous copies onto cards, postcards, OHP transparencies or envelopes, load them into the 1st Tray. If paper other than plain paper is specified and the Manual Bypass is used, the screen changes as shown below. Cards OHP transparencies Postcards or envelopes 5-18 Di1611/Di2011...

  • Page 108: To Copy Using The Multiple Bypass

    “YES/NO” is displayed for approximately 5 seconds after paper is loaded into the Multiple Bypass. Use the keys to select the type of paper loaded. ❍ Select from the following four paper type settings. “PLAIN” “OHP” “CARD” “ENVELOPE” Di1611/Di2011 5-19...
  • Page 109 330 mm. To change the FLS size, contact your service representative. Press the [Yes] key. The main screen appears. If necessary, specify any other copy settings. ❍ Zoom (p. 5-30) ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. 5-20 Di1611/Di2011...
  • Page 110 5.4 Making Copies on Manually Fed Paper If paper other than plain paper is specified and the Multiple Bypass is used, the screen changes as shown below. Cards OHP transparencies Postcards or envelopes Di1611/Di2011 5-21...

  • Page 111: Selecting The Paper Source

    Either load paper with the appropriate size, or press the [Paper] key and select the desired paper size, and then press the [Start] key again. 5-22 Di1611/Di2011...

  • Page 112: To Copy With A Manually Selected Paper Size

    If necessary, specify any other copy settings. ❍ Zoom (p. 5-30) ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-23...

  • Page 113: To Load Special Paper Into The 1St Tray

    SETUP” menu of the Utility mode (“To specify the size of paper loaded into the 1st Tray (“TRAY1 PAPER” function)” on page 7-19). Depending on the paper type set for the “TRAY1 PAPER” function, the screen changes as shown below. Cards OHP transparencies Postcards or envelopes 5-24 Di1611/Di2011...

  • Page 114: Automatically Selecting The Paper Source

    (except the Manual Bypass) with paper meeting the conditions listed above. If there is no paper in any paper drawer, a message appears indicating that paper must be replenished. Copying may not continue if paper is loaded into other paper drawers than the one specified in the message. Di1611/Di2011 5-25...

  • Page 115: Order For Automatically Switching Paper Drawers

    In this case, we recommend that the settings be changed as follows. For the 1st paper drawer, change the paper type using the “TRAY1 PAPER” function on the “PAPER SOURCE SETUP” menu of the Utility mode (p. 7-19). For the Multiple Bypass, specify the paper type after loading the paper (p. 5-16). 5-26 Di1611/Di2011...

  • Page 116: Original Documents

    Using an incorrect type of document may cause a paper misfeed or damage to the document or machine. Note In order to copy double-sided documents, the Duplexing Document Feeder AFR-19 (for Di2011) must be installed. Document Types Single-sided documents Double-sided documents Documents of mixed sizes Di1611/Di2011 5-27...

  • Page 117: Documents Of Uniform Sizes

    — — — — 210 mm A4 L — — A5 C — — 182 mm B5 L — — — 148 mm A5 L — — — — — — 2: Copying possible —: Copying not possible 5-28 Di1611/Di2011...

  • Page 118: Precautions Concerning The Documents

    If a document of a non-standard size is positioned on the Original Glass, the Auto Paper and the Auto Size functions are not available. After loading a document of a non-standard size, press the [Paper] key to select a paper size or press the [Zoom] key to select a zoom ratio. Di1611/Di2011 5-29...

  • Page 119: Specifying A Zoom Setting

    Copies can be made using different scaling proportions for the vertical and horizontal directions. Using the keys, the zoom ratio can be adjusted (increased or reduced) in 0.01 increments. × The vertical and horizontal zoom ratios can be set between 0.50 and × 1.00. 5-30 Di1611/Di2011...

  • Page 120: To Make Copies Using The "Auto" Zoom Setting

    If necessary, specify any other copy settings. ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-31...

  • Page 121: To Make Copies Using A Fixed Zoom Setting

    If necessary, specify any other copy settings. ❍ Paper (p. 5-22) ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. 5-32 Di1611/Di2011...

  • Page 122: To Make Copies Using A Specific Zoom Setting

    If necessary, specify any other copy settings. ❍ Paper (p. 5-22) ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-33...

  • Page 123: To Make Copies Using The "X/Y Zoom" Function

    × 0.50 → × 0.70 → × 0.81 → × 1.00 → × 0.50 . . . Width (Y) Length Press the [No] key to return to the main screen. To correct the specified zoom ratio, press the [No] key, and then perform the operation again from step 2. 5-34 Di1611/Di2011...
  • Page 124 If necessary, specify any other copy settings. ❍ Paper (p. 5-22) ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-35...

  • Page 125: Specifying The Copy Density ("Auto/Photo" Function)

    Selecting a density level that is too dark may cause the media color of the document to be reproduced, and selecting a level that is too light may produce a very faint copy. Therefore, select the appropriate level depending on the document. 5-36 Di1611/Di2011...

  • Page 126: To Make Copies After Specifying A Copy Density

    If necessary, specify any other copy settings. ❍ Paper (p. 5-22) ❍ Zoom (p. 5-30) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 5-37...

  • Page 127: Interrupting Copy Jobs

    Paper (p. 5-22) ❍ Zoom (p. 5-30) ❍ Copy density (p. 5-36) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key to copy the other document. 5-38 Di1611/Di2011...
  • Page 128 After the other document is copied, press the [Interrupt] key. The Interrupt indicator goes off, and all copy functions return to their previous settings. Reload the document that was removed in step 2. Press the [Start] key. The interrupted copy job continues. Di1611/Di2011 5-39...
  • Page 129 5.9 Interrupting Copy Jobs 5-40 Di1611/Di2011...

  • Page 130: Advanced Copy Operations

    Advanced Copy Operations...

  • Page 131: Single-Sided Copies

    Documents 4in1Copy Note The optional Document Feeder must be installed. Load the document to be copied into the Document Feeder. ❍ Refer to “Loading the Document” on page 3-9. Press the [Copy] key. The “2in1” (or “4in1”) indicator lights Di1611/Di2011...
  • Page 132 The copy order can be set to one of the two shown at the right. For PATTERN1 PATTERN2 details on changing the copy order, refer to “To set the “4IN1 COPY ORDER” function” on page 7-53. The manufacturer’s default setting is “PATTERN1”. Di1611/Di2011...

  • Page 133: To Make Copies Using The "Book Separation" Function

    The width of the erased area for the “FRAME” setting can be changed using the “ERASE SETTING” function in the Utility mode (“To specify the erased width (“ERASE SETTING” function)” on page 7-47). Press the [Yes] key. The main screen appears. Di1611/Di2011...
  • Page 134 “CENTER” Erase setting The pages are copied with a Documents Copies blank area along the binding. “BOTH” Erase setting The pages are copied with blank Documents Copies areas framing the text and along the binding. Di1611/Di2011...

  • Page 135: Double-Sided Copies

    When copying double-sided documents, use the Duplexing Document Feeder. Types of double-sided copying Double-sided copy methods Indicator Original Automatic Duplexing Cover Kit Document Document OC-8 Feeder AF- Feeder AFR- Single-sided documents → Double-sided copy × Double-sided document → Double-sided copy × Single-sided documents → 2in1 double-sided copy Di1611/Di2011...

  • Page 136: Double-Sided Copying Is Not Possible Under The Following Conditions

    Double-sided documents are loaded into the Automatic Document Feeder AF- The Manual Bypass is selected. Special paper (cards, OHP transparencies, envelopes, or label sheets) is loaded. The “PAPER TYPE” function is set to “1-SIDE”. Paper with a width less than 140 mm is selected. Di1611/Di2011...

  • Page 137: To Make Double-Sided Copies Using The Original Glass

    [Start] key. After the document page is scanned, the message “NEXT PAGE SCAN=START” appears. Position the second document page, and then press the [Start] key. After the document page is scanned, a double-sided copy is printed. Di1611/Di2011...

  • Page 138: To Make Double-Sided Copies Using The Document Feeder

    The desired double-sided copy function is selected. If necessary, specify any other copy setting. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011...

  • Page 139: Finishing Copies ("Sort" And "Group" Functions)

    Non-sort function: Copies Documents The copies are stacked on top of each other as they are fed out. “Sort” function: The copies are automatically divided Copies Documents into sets with each set containing a copy of each page. 6-10 Di1611/Di2011...
  • Page 140 6.3 Finishing Copies (“Sort” and “Group” functions) “Group” function: The copies are automatically divided Copies Documents into stacks containing all copies of the same page. Di1611/Di2011 6-11...

  • Page 141: Notes On Using The "Sort" And "Group" Functions

    The optional Shifting Unit is not installed. Shift Sorting Each copy set is fed out shifted to alternating side. Note The optional Shifting Unit must be installed. Crisscross Sorting Each copy set is fed out in an alternating crisscross pattern. 6-12 Di1611/Di2011...

  • Page 142: Shift Grouping

    6.3 Finishing Copies (“Sort” and “Group” functions) Shift Grouping Each page set is fed out shifted to alternating sides. Note The optional Shifting Unit must be installed. Crisscross Grouping Each page set is fed out in an alternating crisscross pattern. Di1611/Di2011 6-13...

  • Page 143: Specifying Finishing

    The “Non-sort” function is selected. If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. 6-14 Di1611/Di2011...

  • Page 144: Erasing Sections Of Copies

    Areas such as the unclean-looking frames around copies can be erased. Precautions on the Erased Margin Location The location of the erased area in the copy depends on how the document is positioned. Erase setting Original Glass Document Feeder LEFT UPPER FRAME Di1611/Di2011 6-15...

  • Page 145: To Make Copies Using An Erase Setting

    The main screen appears. If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. 6-16 Di1611/Di2011...

  • Page 146: Negative/Positive Inverted Copying

    Pos.” indicator lights up. If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 6-17...

  • Page 147: Making Copies For Filing ("File Margin" Function)

    Documents Copies Precautions on the Binding Margin Location The location of the binding margin area in the copy depends on how the document is positioned. Original Glass Document Feeder 6-18 Di1611/Di2011...

  • Page 148: To Make Copies Using The "File Margin" Function

    7-45). If necessary, specify any other copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key. Di1611/Di2011 6-19...

  • Page 149: Programmed Copy Jobs

    Advanced Copy Operations (p. 6-1) Press the [Copy Program] key. Using the keys, select “REGIST.”, and then press the [Yes] key. Using the keys, select the program number where you wish to store the copy program, and then press the [Yes] key. 6-20 Di1611/Di2011...
  • Page 150 6.7 Programmed Copy Jobs Note If two copy programs have already been stored, the copy settings previously stored under the selected program number are deleted and replaced with the new ones. Di1611/Di2011 6-21...

  • Page 151: To Recall A Copy Program

    Press the [Copy Program] key. Using the keys, select “RECALL”, and then press the [Yes] key. Using the keys, select the program number of the copy program that you wish to recall, and then press the [Yes] key. Press the [Start] key. 6-22 Di1611/Di2011...

  • Page 152: Access Numbers

    Position the document(s) to be copied, and then select the desired copy settings. ❍ Before Making Copies (p. 5-1) ❍ Advanced Copy Operations (p. 6-1) Press the [Start] key. When you are finished making copies, press the [Access] key. Di1611/Di2011 6-23...
  • Page 153 6.8 Access Numbers 6-24 Di1611/Di2011...

  • Page 154: Utility Mode - Copy Functions

    Utility Mode – Copy Functions...
  • Page 155 This chapter describes the various Utility mode functions that can be used to set copy-related functions. Note Depending on the options installed, some functions may not be available. If an unavailable functions is selected, an error message appears. Di1611/Di2011...

  • Page 156: Utility Menu Commands

    PAPER PRIORITY 1ST/2ND/3RD**/4TH**/5TH**/ MULTI BYPASS DENSITY PRIORITY TEXT/PHOTO/TEXT/P DENSITY LEVEL(A) LIGHT to DARK (3 levels) DENSITY LEVEL(M) LIGHT to DARK (9 levels) BINDING POS. LEFT/RIGHT MARGIN SETTING WIDTH=0-20 (mm) (Default:10) ERASE SETTING LEFT/UPPER/FRAME (WIDTH=5 -20 (mm)) (Default:10) SMALL ORIGINAL DISABLE/ENABLE Di1611/Di2011...
  • Page 157 6 COPY SETTING 2 MIXED ORIGINAL ON/OFF COPY PRIORITY AP/AS/MANUAL OUTPUT PRIORITY NON/SORT/GROUP 4IN1 COPY ORDER PATTERN1/PATTERN2 CRISSCROSS MODE ON/OFF DUPLEX COPY ON/OFF * “1-SIDE” is displayed only when the machine is equipped with the duplex unit. ** Only with Di2011 Di1611/Di2011...

  • Page 158: Specifying Machine Settings ("Machine Setting" Menu)

    LCD CONTRAST This function can be used to adjust the contrast of the Control Panel display. • The manufacturer’s default setting is LANGUAGE This function can be used to set the language of the display and the printed reports. Di1611/Di2011...

  • Page 159: To Select The "Machine Setting" Menu

    5 DENSITY (BOOK) 6 PRINT DENSITY 7 LCD CONTRAST 8 LANGUAGE If, at any time, you wish to quit setting a “MACHINE SETTING” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1611/Di2011...

  • Page 160: To Set The "Auto Panel Reset" Function

    “ON” or “OFF”, and then press the [Yes] key. ❍ If “OFF” was selected, the “MACHINE SETTING” menu appears again. Using the keys, select “0.5”, “1”, “2”, “3”, “4” or “5”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011...

  • Page 161: To Set The "Energy Save Mode" (Preheat Mode) Function

    [Yes] key. ❍ The timer can be set between 1 min and 240 min. ❍ If you wish to correct the setting, press the [No] key, and then enter the new number. The “MACHINE SETTING” menu appears again. Di1611/Di2011...

  • Page 162: To Set The "Auto Shut Off" Function

    [Yes] key. ❍ The timer can be set between 15 min and 240 min. ❍ If you wish to correct the setting, press the [No] key, and then enter the new number. The “MACHINE SETTING” menu appears again. Di1611/Di2011...
  • Page 163 If the Auto Shut Off function is performed and the machine is turned off, it will no longer be possible to make copies or print from a computer. To make copies or print from a computer, turn on the machine. 7-10 Di1611/Di2011...

  • Page 164: To Specify The Scanning Image Quality ("Density(Adf)" Function)

    “DENSITY(ADF)”. Note If the Document Feeder is not ∗ ∗ installed, “ NOT AVAILABLE ” appears. Using the keys, select either “MODE1” or “MODE2”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011 7-11...

  • Page 165: To Specify The Scanning Image Quality ("Density(Book)" Function)

    Refer to “To select the “MACHINE SETTING” menu” on page 7-6. Press the [5] key from the 10-Key Pad to select “DENSITY(BOOK)”. Using the keys, select either “MODE1” or “MODE2”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. 7-12 Di1611/Di2011...

  • Page 166: To Specify The Printing Density ("Print Density" Function)

    SETTING” menu” on page 7-6. Press the [6] key from the 10-Key Pad to select “PRINT DENSITY”. Using the keys, select one of the five settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011 7-13...

  • Page 167: To Set The "Lcd Contrast" Function

    SETTING” menu” on page 7-6. Press the [7] key from the 10-Key Pad to select “LCD CONTRAST”. Using the keys, select one of the four settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. 7-14 Di1611/Di2011...

  • Page 168: To Set The "Language" Function

    Refer to “To select the “MACHINE SETTING” menu” on page 7-6. Press the [8] key from the 10-Key Pad to select “LANGUAGE”. Using the keys, select the desired language, and then press the [Yes] key. The “MACHINE SETTING” menu appears again. Di1611/Di2011 7-15...

  • Page 169: Setting Up The Paper Sources ("Paper Source Setup" Menu)

    “1-SIDE”:The Auto Paper function can be selected and the auto tray switching feature is available only when making single- sided copies. In addition, double-sided copies can be made. • The manufacturer’s default setting is “PLAIN”. 7-16 Di1611/Di2011...

  • Page 170: To Select The "Paper Source Setup" Menu

    1 INCH/METRIC 2 TRAY1 PAPER 3 PAPER TYPE If, at any time, you wish to quit setting a “PAPER SOURCE SETUP” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1611/Di2011 7-17...

  • Page 171: To Specify The Automatic Paper Size Detection Units ("Inch/Metric" Function)

    Press the [1] key from the 10-Key Pad to select “INCH/METRIC”. Using the keys, select a paper tray, and then press the [Yes] key. Using the keys, select either “METRIC” or “INCH”, and then press the [Yes] key. The “PAPER SOURCE SETUP” menu appears again. 7-18 Di1611/Di2011...

  • Page 172: To Specify The Size Of Paper Loaded Into The 1St Tray ("Tray1 Paper" Function)

    (mm), and then press the [Yes] key. ❍ The paper length can be set between 140 mm and 432 mm. ❍ If you wish to correct the setting, press the [No] key, and then enter the new number. Di1611/Di2011 7-19...
  • Page 173 Using the 10-Key Pad, enter the paper width (mm). ❍ The paper width can be set between 90 mm and 297 mm. ❍ If you wish to correct the setting, press the [No] key, and then enter the new number. 7-20 Di1611/Di2011...
  • Page 174 7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu) Press the [Yes] key. The “PAPER SOURCE SETUP” menu appears again. Di1611/Di2011 7-21...

  • Page 175: To Set The "Paper Type" Function

    “PLAIN”, “RECYCLE” or “SPECIAL”, “1-SIDE” and then press the [Yes] key. The “PAPER SOURCE SETUP” menu appears again. Note “1-SIDE” is displayed only when the machine is equipped with the Duplex Unit (option for the Di2011 only). 7-22 Di1611/Di2011...

  • Page 176: Specifying User-Managed Service Tasks ("User Management" Menu)

    If this occurs, use this function to force replenishing of the toner and immediately return the density to its normal level. Di1611/Di2011 7-23...

  • Page 177: To Perform The "Drum Dehumidify" Function

    Press the [Utility] key. “MACHINE SETTING?” appears. Press the key twice to select “USER MANAGEMENT?”, and then press the [Yes] key. Using the keys, select “DRUM DEHUMIDIFY?”, and then press the [Yes] key. Drum drying begins, and the main screen appears. 7-24 Di1611/Di2011...

  • Page 178: To Perform The "Toner Replenisher" Function

    Toner replenishing begins, and the main screen appears. Note While the toner is being replenished, do not turn off the machine or open the Front Cover. If the density of the toner is suitable, do not perform the toner replenishing operation. Di1611/Di2011 7-25...

  • Page 179: Specifying Administrative Settings ("Admin. Management" Menu)

    Note The registering and setup of the administrator access number should be performed by the service representative. For details, contact the service representative. The administrator of this machine should be sure not to lose the administrator access number. 7-26 Di1611/Di2011...

  • Page 180: To Select The "Admin. Management" Menu

    [No] key, and then enter the new number. If, at any time, you wish to quit setting an “ADMIN. MANAGEMENT” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1611/Di2011 7-27...

  • Page 181: To Set The "Auto Shut Off" Function

    “ENABLE”, and then press the [Yes] key. The “ADMIN. MANAGEMENT” menu appears again. Select the “MACHINE SETTING” menu. ❍ Refer to “To select the “MACHINE SETTING” menu” on page 7-6. Press the [3] key from the 10-Key Pad to select “AUTO SHUT OFF”. 7-28 Di1611/Di2011...
  • Page 182 “DISABLE”, it will no longer be possible to make copies or print from a computer after the Auto Shut Off function is performed and the machine is turned off. To make copies or print from a computer, turn on the machine. Di1611/Di2011 7-29...

  • Page 183: To Turn On/Off User (Section) Management

    The “COPY TRACK” appears. Using the keys, select “COPY TRACK MODE?”, and then press the [Yes] key. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY TRACK MODE” function appears again. 7-30 Di1611/Di2011...

  • Page 184: To Register User (Section) Access Numbers

    If you wish to correct the access number, press the [No] key, and then use the 10-Key Pad to enter the new number. Once the access number is registered, a screen appears, allowing you to enter the next access number to be registered. Di1611/Di2011 7-31...
  • Page 185 7.5 Specifying Administrative Settings (“ADMIN. MANAGEMENT” Menu) When you are finished registering access numbers, press the [No] key. The “ACCESS NO. REG” function appears again. Note If you try to register more than 20 access numbers, the message “UP TO 20 SECTIONS” appears. 7-32 Di1611/Di2011...

  • Page 186: To Change/Delete User (Section) Access Numbers

    [No] key, and then enter the new number. A confirmation message appears, asking whether or not to keep the registered access number. To change/delete the access number, press the [No] key. ❍ To keep the currently registered access number, press the [Yes] key. Di1611/Di2011 7-33...
  • Page 187 If the new access number has already been registered, the message “ACCESS NO. IS USE” appears. Press the [No] key, and then enter a different access number. When you are finished changing/ deleting access numbers, press the [No] key. The “ACCESS NO. REG” function appears again. 7-34 Di1611/Di2011...

  • Page 188: To Display/Clear The Total Count For A Specific Account

    [Yes] key. The “COPY TRACK” appears. Using the keys, select “COPY TRACK DATA?”, and then press the [Yes] key. Using the keys, select “DISPLAY”, and then press the [Yes] key. Di1611/Di2011 7-35...
  • Page 189 After the counter is cleared, press the [Yes] key. ❍ After clearing the counter, if you wish to reset the counter to the previous count, press the [Interrupt] key. The “COPY TRACK DATA” function appears again. 7-36 Di1611/Di2011...

  • Page 190: To Clear The Total Counts For All Accounts

    “CLEAR”, and then press the [Yes] key. A confirmation message appears, asking whether or not to clear all counters. Press the [Yes] key. After the message “SECTION COUNTER CLEARED” appears, the “COPY TRACK DATA” function appears again. Di1611/Di2011 7-37...

  • Page 191: Specifying Copy Settings

    “FRAME” Erase settings is 10 mm. SMALL ORIGINAL This function is used to specify whether or not copying is possible after loading a small document whose size cannot be automatically detected. • The manufacturer’s default setting is “ENABLE”. 7-38 Di1611/Di2011...
  • Page 192 • The manufacturer’s default setting is “ON”. DUPLEX COPY This function is used to select whether or not double-sided printing is used. The optional Duplex Unit must be installed. (Option only for the Di2011) • The manufacturer’s default setting is “OFF”. Di1611/Di2011 7-39...

  • Page 193: To Select The "Copy Setting 1" Menu

    6 MARGIN SETTING 7 ERASE SETTING 8 SMALL ORIGINAL If, at any time, you wish to quit setting a “COPY SETTING 1” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. 7-40 Di1611/Di2011...

  • Page 194: To Set The "Paper Priority" Function

    PRIORITY” function, and if the paper in all of these paper drawers are used, a message may appear indicating that paper be loaded into a paper drawer that was not given priority. In this case, load paper according to the message that appears. Di1611/Di2011 7-41...

  • Page 195: To Set The "Density Priority" Function

    If “TEXT” or “TEXT/P” is selected, a screen appears, allowing you to select either “AUTO” or “MANUAL”. Using the keys, select either “AUTO” or “MANUAL”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. 7-42 Di1611/Di2011...

  • Page 196: To Set The "Auto" Density Level ("Density Level(A)" Function)

    Press the [3] key from the 10-Key Pad to select “DENSITY LEVEL(A)”. Using the keys, select one of the three settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. Di1611/Di2011 7-43...

  • Page 197: To Set The Manual Density Level ("Density Level(M)" Function)

    Press the [4] key from the 10-Key Pad to select “DENSITY LEVEL(M)”. Using the keys, select one of the nine settings between “LIGHT” and “DARK”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. 7-44 Di1611/Di2011...

  • Page 198: To Set The "Binding Pos." Function

    SETTING 1” menu” on page 7-40. Press the [5] key from the 10-Key Pad to select “BINDING POS.”. Using the keys, select either “LEFT” or “RIGHT”, and then press the [Yes] key. The “COPY SETTING 1” menu appears again. Di1611/Di2011 7-45...

  • Page 199: To Specify The Binding Width ("Margin Setting" Function)

    ❍ The binding width can be set between 0 mm and 20 mm. ❍ If you wish to correct the setting, press the [No] key, and then enter the new number. The “COPY SETTING 1” menu appears again. 7-46 Di1611/Di2011...

  • Page 200: To Specify The Erased Width ("Erase Setting" Function)

    The width of the area to be erased can be set between 5 mm and 20 ❍ If you wish to correct the setting, press the [No] key, and then enter the new number. The “COPY SETTING 1” menu appears again. Di1611/Di2011 7-47...

  • Page 201: To Set The "Small Original" Function

    “DISABLE” or “ENABLE”, and then press the [Yes] key. ❍ If a document that cannot be detected is loaded and “ENABLE” is selected, the paper given priority is used for copying. The “COPY SETTING 1” menu appears again. 7-48 Di1611/Di2011...

  • Page 202: To Select The "Copy Setting 2" Menu

    4 4IN1 COPY ORDER 5 CRISSCROSS MODE 6 DUPLEX COPY If, at any time, you wish to quit setting a “COPY SETTING 2” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit. Di1611/Di2011 7-49...

  • Page 203: To Set The "Mixed Original" Function

    SETTING 2” menu” on page 7-49. Press the [1] key from the 10-Key Pad to select “MIXED ORIGINAL”. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. 7-50 Di1611/Di2011...

  • Page 204: To Set The "Copy Priority" Function

    Press the [2] key from the 10-Key Pad to select “COPY PRIORITY”. Using the keys, select “AP” (auto paper selection), “AS” (auto zoom ratio) or “MANUAL”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. Di1611/Di2011 7-51...

  • Page 205: To Specify The Default Finishing Mode ("Output Priority" Function)

    SETTING 2” menu” on page 7-49. Press the [3] key from the 10-Key Pad to select “OUTPUT PRIORITY”. Using the keys, select “NON”, “SORT” or “GROUP”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. 7-52 Di1611/Di2011...

  • Page 206: To Set The "4In1 Copy Order" Function

    SETTING 2” menu” on page 7-49. Press the [4] key from the 10-Key Pad to select “4IN1 COPY ORDER”. Using the keys, select either “PATTERN1” or “PATTERN2”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. Di1611/Di2011 7-53...

  • Page 207: To Set The "Crisscross Mode" Function

    SETTING 2” menu” on page 7-49. Press the [5] key from the 10-Key Pad to select “CRISSCROSS MODE”. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. 7-54 Di1611/Di2011...

  • Page 208: To Set The "Duplex Copy" Function

    SETTING 2” menu” on page 7-49. Press the [6] key from the 10-Key Pad to select “DUPLEX COPY”. Using the keys, select either “ON” or “OFF”, and then press the [Yes] key. The “COPY SETTING 2” menu appears again. Di1611/Di2011 7-55...
  • Page 209 7.6 Specifying Copy Settings 7-56 Di1611/Di2011...

  • Page 210: Error Messages

    Error Messages...

  • Page 211: When The Message "Toner Empty" Appears

    For details, contact your service representative. In order to prevent the used toner bottle from dirtying anything, keep it in the box. Dispose of the used toner bottle according to your local regulations. To replace the toner bottle Open the Front Cover. Di1611/Di2011...
  • Page 212 ➜ As shown at the right, the tab on the toner bottle should securely fit into the notch in the Toner Bottle Holder. Lightly tap the bottom of the toner bottle three or four times. Di1611/Di2011...
  • Page 213 When the Front Cover is closed, the toner automatically begins refilling. Are copies faint immediately after the toner bottle is replaced? ➜ Perform the “TONER REPLENISHER” function in the Utility mode (“To perform the “TONER REPLENISHER” function” on page 7-25). Di1611/Di2011...

  • Page 214: When The Message "Paper Jam" Appears

    Follow the appropriate procedure described below to clear the misfed paper. To clear a paper misfeed in the Duplex Unit Note The optional Duplex Unit must be installed. (Di2011 only) Open the Duplex Unit door. Carefully pull out any misfeed paper. Close the Duplex Unit door. Di1611/Di2011...

  • Page 215: To Clear A Paper Misfeed In The Main Unit Or 1St Tray

    CAUTION Decreased copy quality may result if the surface of the PC drum is touched. ➜ Be careful not to touch the surface of the PC drum. PC drum Di1611/Di2011...
  • Page 216 Pressure Levers? ➜ Only hold the green part of the Pressure Levers when pulling them down. Pressure Levers Slowly pull out the paper. While holding the Guide Plate pressed down, slowly pull out the paper. Di1611/Di2011...
  • Page 217 Slide the paper guides against the edges of the paper. Is the paper guide positioned correctly? ➜ Make sure that the paper guides are pushed up against the edges of the paper. Di1611/Di2011...
  • Page 218 8.2 When the Message “PAPER JAM” Appears Close the 1st Tray. Di1611/Di2011...

  • Page 219: To Clear A Paper Misfeed In The Paper Feed Unit

    8.2 When the Message “PAPER JAM” Appears To clear a paper misfeed in the Paper Feed Unit Open the Side Cover of the Paper Feed Unit. Slowly pull out the paper. Close the Side Cover of the Paper Feed Unit. 8-10 Di1611/Di2011...

  • Page 220: To Clear A Paper Misfeed In The Multiple Bypass

    Decreased copy quality may result if the surface of the image transfer roller is touched. ➜ Be careful not to touch the surface of the image transfer roller. Image transfer roller Remove all paper from the Multiple Bypass. Open the Side Cover of the main unit. Di1611/Di2011 8-11...
  • Page 221 8.2 When the Message “PAPER JAM” Appears Slowly pull out the paper. Close the Side Cover of the main unit. Load the paper into the Multiple Bypass again. 8-12 Di1611/Di2011...

  • Page 222: When The Message "Original Doc.jam" Appears

    Remove the misfed document according to the following procedure. To clear a misfeed in the Automatic Document Feeder (AF-12) Open the Document Feeder Cover. Remove all document pages from the Document Feeder Tray. Di1611/Di2011 8-13...
  • Page 223 8.3 When the Message “ORIGINAL DOC.JAM” Appears Lift open the Automatic Document Feeder. While turning the Document Feed Knob in the direction of the arrow, slowly pull out the document. Close the Automatic Document Feeder and the Document Feeder Cover. 8-14 Di1611/Di2011...
  • Page 224 Load the documents removed in step 2 back into the tray. Note If “RETURN 1 (2) ORIG. to ADF and PRESS START KEY” appears on the display, also load the one or two document pages that caused the paper misfeed. Di1611/Di2011 8-15...

  • Page 225: To Clear A Misfeed In The Duplexing Document Feeder (Afr-19)

    To clear a misfeed in the Duplexing Document Feeder (AFR-19) Pull up the lever for the Document Feeder Cover to open the cover. Carefully pull out any misfed documents. Swing up the Document Guide Lever. Turn the Document Feed Knob to feed out any misfed documents. 8-16 Di1611/Di2011...
  • Page 226 8.3 When the Message “ORIGINAL DOC.JAM” Appears While supporting the Document Feed Tray with your right hand, carefully pull out any misfed documents. Return the Document Guide Lever to its original position, and then close the Document Feeder Cover. Di1611/Di2011 8-17...

  • Page 227: Main Error Messages And Their Remedies

    PAPER EMPTY The selected paper tray has run Load paper of the specified size into out of paper. the specified paper tray. (Flashing alternately) “#” indicates the paper tray, and “XXX” indicates the paper size. LOAD PAPER (#XXX) 8-18 Di1611/Di2011...
  • Page 228 Bypass, remove the loaded paper, and then reload the paper according to the procedure described in “Copying Onto Manually Fed Paper” on page 5-16. • For a custom paper size, refer to “To copy onto postcards” on page 4-14. Di1611/Di2011 8-19...
  • Page 229 The Imaging Unit should be Contact your service representative. replaced. MACHINE TROUBLE Some problem occurred in the Turn the machine off, then on again. machine. If the error is still displayed, contact (Flashing alternately) your service representative. (C####) 8-20 Di1611/Di2011...

  • Page 230: Troubleshooting

    Troubleshoot-...

  • Page 231: When Incorrect Copies Are Produced

    Use the Auto/ Photo key to select a lighter density for the background. (p. 5-36) The Imaging Unit has Contact your service reached the end of its representative. service life. Di1611/Di2011...
  • Page 232 The Document Guide Slide the Document Guide Plates are not slid up Plates against the edges of against the edges of the the document. document. Curled paper was loaded Flatten the paper before into the paper tray. loading it. Di1611/Di2011...

  • Page 233: When Copying Is Not Performed Correctly

    The machine cannot be turned The power supply cord has Plug the power supply cord been unplugged from the into the electrical outlet. electrical outlet. The breaker for the Close the breaker for the electrical circuit has been electrical circuit. tripped. Di1611/Di2011...

  • Page 234: Appendix

    Appendix...

  • Page 235: Specifications

    10.1 Specifications 10.1 Specifications Main Unit Di1611/Di2011 Specification Di1611 Di2011 Type Desktop/Console* Platen Stationary Photo conductor Copying system Electro photographic printing system Developing system MTHG system Fusing system Heat-roller-fixing system × Resolution 600 dpi 600 dpi Document Types: Sheets, books, and other three-dimensional objects ×...

  • Page 236: Duplex Unit Ad-17

    Leading edge: 4 mm, Trailing edge: 4 mm, Rear edge: 4 mm, Front edge: 4 mm Power requirements AC 220 to 240 V, 4.5 A (Di1611), 5.5 A (Di2011), 50/60 Hz Power consumption 230 V: 1050 W (Di1611), 1250 W (Di2011) ×...

  • Page 237: Duplexing Document Feeder Afr-19

    — — — — 210 mm A4 L — — A5 C — — 182 mm B5 L — — — 148 mm A5 L — — — — — — 2: Copying possible —: Copying not possible 10-4 Di1611/Di2011...

  • Page 238: Automatic Document Feeder Af-12

    Power consumption Less than 9 W × × Size 590 mm (width) 558 mm (depth) 108 mm (height) Weight 5.5 kg Shifting Unit OT-103 Specification Shifting amount 28 mm Paper capacity 250 sheets Power consumption Less than 63 W Di1611/Di2011 10-5...

  • Page 239: Job Separator Js-204

    Plain or recycled paper: 100 sheets Special paper (cards, OHP transparencies, postcards, label sheets): 20 sheets Envelopes: 10 envelopes Power consumption Less than 9 W × × Size (Maximum) 439 mm (width) 435 mm (depth) 137 mm (height) Weight 3.0 kg 10-6 Di1611/Di2011...

  • Page 240: Care Of The Machine

    Original Glass ➜ Clean the Original Glass by wiping it with a soft, dry cloth. Document Pad ➜ Clean the surface of the document pad by wiping it with a soft cloth dampened with alcohol. Di1611/Di2011 10-7...

  • Page 241: Control Panel

    Control Panel ➜ Clean the Control Panel by wiping it with a soft, dry cloth. CAUTION Incorrectly cleaning the Control Panel keys may damage them. Never use mild household detergent or glass cleaner to clean the Control Panel. 10-8 Di1611/Di2011...

  • Page 242: Function Combination Table

    10.3 Function Combination Table 10.3 Function Combination Table Function Combination Table for Di1611 Di1611/Di2011 10-9...

  • Page 243: Function Combination Table For Di2011

    Book Separation can be combined with Sort/Group. However, regardless of the selected Finishing setting, the final output is the same. Book Separation + Duplex can be combined with Sort/Group. However, regardless of the selected Finishing setting, the final output is the same. 10-10 Di1611/Di2011...

  • Page 244: Paper Size And Zoom Ratio Tables

    210 mm 301 mm × × Letter 8-1/2 216 mm 279 mm × × Government Letter 10-1/2 203 mm 267 mm × × Quarto 203 mm 254 mm × × Statement Invoice 5-1/2 8-1/2 140 mm 216 mm Di1611/Di2011 10-11...

  • Page 245: Zoom Ratios

    × 1.22 × 0.81 × 257 mm 364 mm × × 0.57 14-1/4 × 0.70 × 0.50 × 1.15 × 0.81 × 182 mm 257 mm × × 0.57 7-1/4 × 0.70 × 1.63 × 1.15 × 1.41 10-12 Di1611/Di2011...
  • Page 246 1.21 × Foolscap Letter 0.84 × 8-1/2 × × Invoice 0.65 215.9 mm 330.2 mm × × 1.30 × × 1.07 × Letter Invoice 0.64 × 8-1/2 × × × 1.29 215.9 mm 279.4 mm × × 1.27 Di1611/Di2011 10-13...
  • Page 247 × × Invoice 2.00 × 5-1/2 8-1/2 × × × 1.64 139.7 mm 215.9 mm × Legal 1.54 × Foolscap 1.50 × Letter 1.29 Zoom ratio=Paper size/Document size 1 inch = 25.4 mm 1 mm = 0.0394 inch 10-14 Di1611/Di2011...

  • Page 248: Index

    Index...
  • Page 249 Binding position ................7-45 Binding width ................7-46 Copy priority ................7-51 Crisscross mode ................7-54 Default density level (Auto) ............7-43 Default density level (Manual) ............. 7-44 Default finishing mode ..............7-52 Default mixed originals setting ............ 7-50 11-2 Di1611/Di2011...
  • Page 250 Drum dehumidifying ................7-24 Energy save mode ..............2-23 Erase function ..................6-15 Error messages .................8-18 Finishing copies .................6-10 Grouping ..................6-13 Sorting ..................6-12 Function combination table ..............10-9 Incorrect copies ...................9-2 Installation site ..................2-2 Interrupting copy jobs ................5-38 Job separator ..................10-6 Di1611/Di2011 11-3...
  • Page 251 Manual paper selection ..............5-23 Menu commands ................7-3 Multiple bypass ................. 10-6 Negative/positive inverted copying ........... 6-17 Operation precautions ................. 2-4 Options Document feeder ................. 2-13 Job separator ................2-16 Multiple bypass ................2-14 Paper feed unit ................2-15 11-4 Di1611/Di2011...
  • Page 252 Paper specifications ................5-2 Paper type function ................7-22 Power source ..................2-2 Power supply ..................2-22 Queued copy jobs ................2-24 Scanning image quality ..............7-11 Shifting unit ..................10-5 Space requirements ................2-3 Specifications ..................10-2 Toner replenishing ..............7-25 TOTAL COUNT .................3-19 Turning on/off ..................2-22 Di1611/Di2011 11-5...
  • Page 253 User management Administrative settings ..............7-30 User-managed service tasks ............7-23 Utility mode ..................7-2 Copy setting 1 ................7-40 Copy setting 2 ................7-49 Zoom setting ..................5-30 Auto zoom ratio ................5-31 X/Y zoom function ............... 5-34 11-6 Di1611/Di2011...
  • Page 254 Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. 2004. 6 Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan...

This manual is also suitable for:

Di2011

Table of Contents