3) Adjustment of the PC/Suction Drive Timing Belt
4) Adjustment of the Duplex Unit Timing Belt
5) Adjustment of the Duplex Unit Front/Rear Edge Guide Timing Belt
1. Remove the Rear Cover.
2. Remove the Master Board mounting plate Assy. and
flywheel.
3. Loosen the screw with which each tension lever is secured
as shown on the left and then re-tighten it.
1155D133AB
1. Open the Front Lower Door and pull out the Duplex Unit.
2. Remove the Duplex Unit Cover.
3. Loosen the screw by which the Tension Lever is mounted
as shown on the left and then re-tighten it.
1155D134AA
1. Open the Front Lower Door and pull out the Duplex Unit.
2. Remove the Misfeed Clearing Knob and one screw, then
loosen five screws to remove the Duplex Unit Cover.
1155D216AB
3. Loosen the screw by which the Tension Lever is mounted
as shown on the left and then re-tighten it.
1155D135AA
D-73