Table of Contents
Advertisement
Touch Panel Display
Hard Disk Check
ECC Check
Date/Time Check
Tech. Rep. Mode
Checks for proper connection and read/write operation of the Hard Disk.
Note: The Touch Panel shows the percentage of sequence completed. If the
check has been completed okay, it gives the message of "OK." If a
fault was encountered, the panel gives the message of "NG" together
with the corresponding malfunction code (C12XX).
<Procedure>
Press the Start key to start the diagnostic sequence.
Note: The check is automatically terminated as soon as it is completed.
Checks for proper connection and operation of the ECC.
Note: The Touch Panel shows the percentage of sequence completed. If the
check has been completed okay, it gives the message of "OK." If a fault
was encountered, the panel gives the message of "NG" together with
the corresponding malfunction code (C18XX).
<Procedure>
Press the Start key to start the diagnostic sequence.
Note: The check is automatically terminated as soon as it is completed.
Checks for the current time-of-day and date.
S-28
Function
Operation
Advertisement
Chapters
Table of Contents
