Universal Tray Width Detection Adjustment (Fd Mode - Minolta Di 620 Manual

6) Universal Tray Width Detection Adjustment (FD Mode)

When is this adjustment required?
• Be sure to perform the Universal Tray Width Detection Adjustment (FD Mode) after the following
items have been done.
1) Memory Clear
2) RAM Board replacement
3) Disassembly of the Universal Tray
Adjustment Procedure
1. Call the Tech. Rep. mode menu to the screen.
2. Touch [Function] and [Printer], in that order.
3. Touch [FD Universal Tray width detection Adjustment].
10. After the adjustment, touch [End] and then [Menu] to recall the Tech. Rep. mode to the screen.
4. Select [Max.].
5. Place A4 or Letter paper in the crosswise direction in the
Universal Tray and slide the Edge Guide to the width of the
paper.
6. Press the Start key to execute the function.
1155D148AA
7. Select [Min.].
8. Place B5 paper in the crosswise direction in the Universal
Tray and slide the Edge Guide to the width of the paper.
9. Press the Start key to execute the function.
1155D149AA
D-87