11-10.Toner Suction Fan Motor - Minolta Di 620 Manual

1155SBM1110A
11-10. Toner Suction Fan Motor
This copier is provided with a Suction Duct under the 2nd Sleeve/Magnet Roller.
Toner particles from the Developing Unit are drawn in through the Suction Duct so
that they will not fall over the Pre-Image Transfer Guide Plate and Image Transfer/
Paper Separator Coronas Unit.
The toner particles are drawn through the Suction Duct and collected by the Air Fil-
ter as the air is drawn out of the copier by Toner Suction Fan Motor.
Toner Suction Path
Suction Duct
Air Filter
CONTROL SIGNAL
M13
1075M070AA
PJ2A-3B
M-64
Toner Suction Fan Motor
(M13)
1st Air Filter
ON OFF
L H
Air
2nd Air Filter
1075M071AA
WIRING DIAGRAM
F-4