Minolta Di 620 Manual page 185

Touch Panel Display
Simplex / Duplex?
Universal Tray
<Printer>
Touch Panel Display
Toner Empty Stop
T/C Abnormal
Lead Edge Erase
Trail Edge Erase
Loop Adjustment
γ Table
Tech. Rep. Mode
Setting (The default is
Select whether or not to enable the setting of 1-Sided
inal Copy Default available from User's Choice.
Note: If "Both" is selected, 1-Sided
option.
Display
Description Does not limit the options for
Original
2-sided copying only.
Set the size in the CD direction of the inch paper used in the Universal Tray if
its size in the FD direction is 14".
14 x 81/4
Setting (The default is
Select whether or not to inhibit copying when a toner-empty condition is
detected.
Enable
Select whether to enable or disable copying when an abnormal T/C is
detected.
Enable
Note: As a rule, the setting should not be changed.
Set the erase width on the leading edge of the image.
Note: The press of the Start key lets the copier output a test pattern (grid pat-
tern). The paper source is the Universal Tray.
Set the erase width on the trailing edge of the image.
Note: The press of the Start key lets the copier output a test pattern (grid pat-
tern). The paper source is the Universal Tray.
Set the length of loop to be formed between the Synchronizing Rollers.
Display Description
−3 Loop length approx. −3mm
−2 Loop length approx. −1mm
−1
Loop length approx. 1mm
0 Loop length approx. 3mm
Specify the gamma (γ) table (gradation characteristics) in the Photo mode.
S-30
Tech. Rep. Choice
Highlighted
1-Sided becomes available as an
Both
Limits the options for Origi-
Copy Default to
nal
sided copying only.
Highlighted
(0 to 5) (4mm)
(0 to 5) (3mm)
Display
1 Loop length approx. 5mm
2 Loop length approx. 7mm
3 Loop length approx. 9mm
(0 to 9) (4)
.)
1-Sided under Orig-
Duplex Only
Copy Default to 2-
14 x 81/2
.)
Disable
Disable
Description