Minolta Di 620 Manual page 186

Touch Panel Display
Straight Line
VG Adjust
T/C Auto Recover
Tech. Rep. Mode
Setting (The default is
Use this function to make the image look soft or hard.
0
(Not used)
Note: The setting "0" results in no straight line screening performed.
Set VG when a fog or void occurs in the image.
−2
(Lighter)
Select whether to enable or disable auto recovery of T/C when it drops.
Enable
Note: As a rule, the setting should not be changed.
S-31
Tech. Rep. Choice
Highlighted
1
(Making the
image look hard)
0
.)
4 7)
(Making the
image look soft)
+3
(Darker)
Disable