1155SBM1102A
11-2. Magnetic Pole Positioning
Each Magnet Roller of the Toner Replenishing, 1st, and 2nd Sleeve/Magnet Rollers
is made up of five magnets asymmetrically packed.
The Bias Plate at the front of the Developing Unit ensures that the angle of principal
magnetic pole N1 of the 1st Sleeve/Magnet Roller and that of principal magnetic
pole S1 of the 2nd Sleeve/Magnet Roller will not be changed with respect to the
center of the PC Drum.
The torsion springs at the front and rear ends of the Developing Unit press the Ds
Positioning Collars of the 1st and 2nd Sleeve/Magnet Rollers tightly against the PC
Drum, thus keeping constant the distance between each Sleeve/Magnet Roller and
the PC Drum.
N2
S1
N1
S2
S3
N3
S1
N1
N2
S2
S1
N2
N1
Developer
Doctor Blade
Solid Line: Magnetic flux density
Dotted Line: Magnetic attraction
M-55
Developer
Regulator
1075M058AA