Minolta Di 620 Manual page 172

1155SBS040403A
Touch Panel Display
Realing Warning
"Small" Originals
4 in 1 Copy Order
Date Printing Format
Date Printing Position
Page Number Position
1155SBS040404A
Touch Panel Display
Confirmation Beep
[3/6]
Setting (The default is
Select whether to give ("ON") a warning message or not ("OFF") by auto-
matically detecting an original placed out of alignment on the Glass.
ON
Select whether to enable ("ON") a copy cycle or not ("OFF") when it is initi-
ated by pressing the Start key with an original of the smallest detectable
size (metric areas: A5 or smaller, inch areas: Letter or smaller) placed on
the Original Glass.
ON
The copy cycle is run using the
paper loaded in the default paper
source.
Note: The default setting is OFF for the metric areas and ON for the inch
areas.
Specify the default copying order in the 4in1 mode.
Select the delimiter and format for date printing.
XX/XX/XX
'97 / 12 / 27
12 / 27 / '97
Set the position at which to print the date.
<Metric Areas>
X (4 to 40) (8mm)
Y (4 to 40) (20mm)
Set the position at which to print the page number, how many millimeters
or inches from the bottom of the page.
<Metric Areas>
(4 to 40) (8mm)
[4/6]
Setting (The default is
Select whether to run "ON" or "OFF" the beep that sounds each time a key
on the control panel is pressed or that on the Touch Panel is touched.
ON
S-17
Highlighted
A warning message is given and
the copier inhibits the start of this
copy cycle.
1 2 1 2
3 4 3 4
<Punctuation>
<Date Format>
DEC / 27 / '97
27 / 12 / '97
X
Y
(3/16 to 1 9/16")
Highlighted
.)
OFF
OFF
XX.XX.XX
27 / DEC / '97
<Inch Areas>
(3/16 to 1 9/16") (1 7/6")
(3/16 to 1 9/16") (1 7/6")
<Inch Areas>
(1 7/6")
.)
OFF