Minolta Di 620 Manual page 173

1155SBS040405A
Touch Panel Display
Universal Tray
Special Paper
Auto Panel Reset
Energy Saver Mode
Plug-In Counter Reset
Auto Shut Off
[5/6]
Setting (The default is
Select the default paper size detection for the Universal Tray.
Auto Detect
If Custom Size is selected, set the size for X and Y.
<Metric Areas>
X (4 to 40) (8mm)
Y (4 to 20) (20mm)
Set up drawer for special paper loading.
Normal
Recycled
Not for 2-sided
Specify the default exposure mode selected automatically when power is
turned ON or the Panel Reset key pressed.
30 seconds
3 min.
Set the time it takes the copier to enter the Energy Saver mode after a
copy cycle has been completed or the last key operated. Use the 10-key
Pad to set the time (1 to 240 min.)
Select whether to reset the panel or not when the Plug-In Counter is pulled
out of the copier, a magnetic card is pulled out of the Data Controller, or
the Access Mode key is pressed.
ON
Select whether to turn ON or OFF the Auto Shut Off function that shuts
down the copier a given period of time after a copy cycle has been com-
pleted or the last key operated.
Selecting "ON" means setting the time it takes the Auto Shut Off function to
be activated, that can range from 15 min. to 240 min.
No Reset
Note: "OFF" is displayed when "Enable" is selected for "Non-Auto Shut Off"
of the "Administrator Mode" function.
S-18
Highlighted
Custom Size
<Inch Areas>
X (7 1/4" to 17")
Y (5 1/2" to 11 3/4")
Cover / Insert
1 min.
5 min.
(1 to 240) (15 min.)
(15 to 240)
.)
(11")
(8 1/2")
Cover
Insert
2 min.
No Reset
OFF
(90 min.)