Minolta Di 620 Manual page 210

Touch Panel Display
Feed (2)
Feed (FD)
Feed (CD)
S-ADF Feed (FD)
S-ADF Feed (CD)
Regist. Loop (1)
Regist. Loop (2)
Feed Position
Tech. Rep. Mode
Setting (The default is
Set the correction value for the original scanning position for the second
page of a 2-sided original when the EDH is used.
Set the correction value for the original scanning position in the FD direc-
tion when the EDH is used.
Set the correction value for the original scanning position in the CD direc-
tion when the EDH is used.
Set the correction value for the original scanning position in the FD direc-
tion in the single feed mode.
Set the correction value for the original scanning position in the CD direc-
tion in the single feed mode.
Set the length of loop to be formed on the leading edge of the 1-sided orig-
inal before the Registration Roller of the EDH.
Set the length of loop to be formed on the leading edge of the 2-sided orig-
inal before the Registration Roller of the EDH.
Set the target stop position of the Scanner during scanning by the EDH.
S-55
Adjust
Highlighted
(−5.0 to +5.0) (0.0mm)
(−4.0 to +4.0) (0.0mm)
(−3.0 to +3.0) (0.0mm)
(−4.0 to +4.0) (0.0mm)
(−3.0 to +3.0) (0.0mm)
(−5 to +5) (0mm)
(−5 to +5) (0mm)
(−2 to +2) (0)
.)