Table of Contents
Advertisement
<Duplex Unit Paper Take-Up Misfeed>
Type
Trailing edge detection by
Turnover Feed Entry Sen-
sor PC11
Leading edge detection by
Duplex Unit Horizontal
Transport Entry Sensor
PC13
Leading edge detection by
Transport Roller Sensor
PC1
Leading edge detection by
Turnover/Exit Sensor PC14
Leading edge detection by
Turnover/Exit Sensor PC14
Trailing edge detection by
Turnover/Exit Sensor PC14
PC11 is not unblocked ([H]) even after the lapse of approx. 2.3 sec. after
Paper Leading Edge Sensor PC2 has been unblocked ([H]) when the
paper is fed out onto the Lower Exit Tray or stored in the Duplex Unit.
PC13 is not blocked ([L]) even after the lapse of approx. 0.7 sec. after
PC11 has been unblocked ([H]).
PC1 is not blocked ([L]) even after the lapse of approx. 2.5 sec. after PC13
has been blocked ([L]) when the paper is stored into the Duplex Unit.
PC14 is not blocked ([L]) even after the lapse of approx. 0.9 sec. after the
paper, which is to be turned over and fed out through the lower exit port,
has unblocked ([H]) PC11.
PC14 is not blocked ([L]) even after the lapse of approx. 0.6 sec. after the
paper, which is to be fed out through the lower exit port, has blocked
PC11.
PC14 is not unblocked ([H]) even after the lapse of approx. 1.6 sec. after it
has been blocked ([L]).
T-11
Detection Timing
Advertisement
Chapters
Table of Contents
