Disassembly Of The Synchronizing Rollers Unit - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

8) Disassembly of the Synchronizing Rollers Unit

3. Remove the pressure springs at the front and rear, Upper Transport Roller, and Upper Synchronizing

1) Different types of pressure springs are used for the Transport Roller and Synchronizing Roller. Do

not confuse them at reinstallation.

2) When the Transport Roller and Synchronizing Roller have been removed, perform Loop

Adjustment and Zoom (FD) Adjust.

4. Remove four screws and the Paper Dust Remover.

1. Remove the Synchronizing Rollers Unit.

2. Unhook the springs from the front and rear ends of the

Misfeed Clearing Guide Plate.

Table of Contents