Minolta Di 620 Manual page 350

Hide thumbs Also See for Di 620:

Table of Contents

2. Wind the length of the cable on the cylindrical stopper end

counterclockwise four turns around the pulley, from the

back to the front side.

3. Wind the length of the cable on the mounting bracket end

clockwise four turns from the front to the back side, then

slip the Cable Holding Jig onto the pulley to secure the

cable in position.

Make sure that no part of the cable rides on the other.

4. Fit the Cable Drive Pulley to the drive side plate and mount

the pulley to the copier.

5. Wind the length of the cable on the cylindrical stopper end

around pulleys C and B and secure its end to the frame.

6. Wind the length of the cable on the mounting bracket end

around pulleys A and B.

Chapters

Table of Contents