4. Remove two screws and the harness cover.
1075D244AA
5. Remove one screw and the Fusing Roller Thermal Fuse
6. Remove two screws and the heater harnesses.
1155D095AA
7. Remove two screws and the Fusing Roller Thermal Fuse.
1075D246AA
8. Remove two screws and the Fusing Unit Rear Cover.
1155D096AA
9. Unplug one connector and remove one screw and the
10. Slide out Upper Fusing Roller Heater Lamps.
When installing the heater lamps, make sure that the end
of the lamps on which their ratings are shown is on the
front side.
1155D097AA
holder.
heater lamp holder.
NOTE
D-58