Table of Contents
Advertisement
118
4. When the Message "A paper misfeed has been detected." Appears
Duplex Unit
Open the Front Door. Turn the Lock
1
Release Lever counterclockwise to
unlock and swing up the Upper Half of
the copier. Then lock Stopper M2 .
Open the Left Door and Lower Left
2
Door. Pull out the sheet of paper.
Close the Left Door and Lower Left
3
Door.
Open the Lower Right Door and pull
4
out the sheet of paper.
Close the Lower Right Door.
5
Slightly lift up the Upper Half of the
6
copier and unlock Stopper M2 .
Gently swing down and lock the Upper
Half of the copier. Then, close the
Front Door.
Slide out the Duplex Unit and open
7
Misfeed Clearing Guide Plate D . Pull
out the sheet of paper from the Duplex
Unit.
Securely close Misfeed Clearing Guide
8
Plate D and slide the Duplex Unit
back into the copier.
Open and close the Front Door to reset
9
the misfeed indication on the Touch
Panel.
Advertisement
Table of Contents
