Tmg-3 Trimming Unit - Minolta CF5001 User Manual

TMG-3 Trimming Unit

4 Trimmer unit tray
1 Front-right cover opens to allow removal of mishandled paper.
2 Front door opens to allow removal of mishandled paper or waste paper.
3 Trimmer stacker holds sets output in Trimming mode.
4 Trimmer unit tray slides to the left side each time a trimmed booklet is delivered.
5 Trimmer stacker cover opens to allow you to take out the finished sets.
6 TMG Kit A connects the Finisher and Trimming unit.
7 FN-9 Finisher allows the Trimming unit to be installed.
2-14
7 FN-9 Finisher
6 TMG Kit A
5 Trimmer stacker cover
3 Trimmer stacker
DO NOT place heavy objects on the trimmer stacker or apply any weight on it,
and DO NOT use it for storage.
Excessive weight applied to the inside or outside of the trimmer stacker will
damage the equipment.
Machine Configuration (continued)
2 Front door
1 Front-right cover