Power Unit
2.
Loosen advancer arm mounting bolt and remove the arm.
Check ball joint cap for wear and damage link
rod for bend.
3.
Remove throttle position sensor's lower mounting screw.
That is rubber mounted.
Do not remove or loosen screws a.
4 Mount Bolt
5 Washer ( 8.5-24-1.5)
6 Washer (12.5-24-1)
7 Collar
8 Bushing
9 Throttle Link Rod Snap
0 Rod Snap
Check link rod snap for wear and damage.
10) Inspection of Throttle Body
1.
Check throttle body for wear of throttle cam and cam
roller, and check if throttle cam and roller move smoothly.
Do not move adjust screw located on the upper
part of throttle body.
5-26
a
1
9
4
2
0
7
8 5
5
6
3
TLDI 75/90C2 2010