Assembly Of Ffp Ass'y - TOHATSU MD 70-90C2 Service Manual

10) Assembly of FFP Ass'y

Assemble following parts.
Attach hose joint adapter 1 and metal washer 2 to upper
1.
case 3.
Hose Joint Adapter 1 :
14 - 16 N·m (10 - 12 lb·ft) [1.4 - 1.6 kgf·m]
Degrease edge and then apply adhesive :
ThreeBond 1342
1342 1342 342
Replace metal washer 2 with new one if FFP is
disassembled.
Attach pipe grommet 4 and lower grommet 5 to FFP 6.
2.
Pipe Grommet 4, Lower Grommet 5 :
Genuine Engine Oil
2st
Install FFP 6 to case 7.
3.
To avoid the use of FFP 6 on another
model, check the marking a on the body,
before assembly.
For TLDI40/50B, TLDI40/50B2,
TLDI70/90B and TLDI90C : "GSC434"
For TLDI75/90C2, TLDI115A and TLDI115A2 :
"GSC295"
・Adjust position of FFP body so that pipe
grommet 4 can be inserted into upper case 3.
・Lightly applying 2 stroke engine oil on inside
and outside of upper grommet 4 makes
adjustment of position of FFP body easier.
・Installation orientation of 6 to 7 is as shown.
Put upper case 3 on the top and check the
position.
・Install upper case taking care that motor leads
are not caught between upper case and FFP
body.
TLDI 75/90C2 2010
CAUTION
1
1342 1342
1342
2
4
a
6
7 7
4 4
342
3
8
2st
4
2st OIL
5
2st
2st OIL
7
6 6
8 8
4-29