Inspection Of Exhaust Cover; Removing Crank Case - TOHATSU MD 70-90C2 Service Manual

Power Unit
• Pry the gap of the cover at five grooves one
by one by using a bladed screw driver.
• The cover can be removed easier if parts
cleaning agent is applied in the gap one by
one from the top one.
• Be careful to pry the gap evenly, or the cover
may be damaged or warped.

18) Inspection of Exhaust Cover

1. Check the removed outer exhaust cover and inner exhaust
cover for damages such as distortion or scratches on their
mating surface.
Remove clogs and debris from cooling water
passage of exhaust cover.
2. Check exhaust cover anode.
Replace if 2/3 of the original size.

19) Removing Crank Case

1. Remove starter motor bracket.
2. Loosen crank case mounting bolts in the order shown,
remove them, and remove crank case.
5-32 TLDI 75/90C2 2010