TOHATSU MD 70-90C2 Service Manual page 169

3. Clean mating faces of engine base and cylinder ass'y, and
then, attach dowel pins 4 gasket.
Use new engine base gasket.
4. Install power unit securely, and tighten engine mount bolts
2 specified torque.
Engine Mount Bolts 2 :
25 N · m (18 lb · ft) [2.5 kgf · m]
Be careful not to catch wires and hoses and
other parts between engine base mating
surfaces.
5. Install other parts reverse of their removing steps.
Refer to "Electrical Wiring Assembling Instruction
Diagrams 1 and 2" in Chapter 11.
TLDI 75/90C2 2010
1
1
2
2
5
5-53