Removing Flywheel; Removing Alternator - TOHATSU MD 70-90C2 Service Manual

Power Unit

4) Removing Flywheel

1. Attach flywheel puller kit to flywheel.
Flywheel Puller Lit:
P/N. 3T1-72211-0
2. Fix flywheel puller, and loosen drive pulley (Magneto nut)
and remove it.
Drive pulley (Magneto nut) is threaded right-
hand.
3. Remove magneto by using flywheel puller kit and flywheel
center plate.
Turn center bolt clockwise to remove flywheel.
4. Remove magneto key.

5) Removing Alternator

1. Remove oil tank installation bolt (upper one) and move oil
tank a little.
・Before removing oil tank, disconnect oil level gage
connector, and oil hose at oil filter side.
・Bend oil hose at the tip to prevent oil from spilling.
2. Disconnect CPS connector that is located in the back of oil
tank.
Removing breather hose of vapor separator
makes the work easier.
5-20 TLDI 75/90C2 2010