Cowl, Bracket and PTT Unit
3. Inspection Items
1) Removing Top Cowl
1.
Pull outward upper motor cover hook levers
down lever 2 and remove upper motor cover.
2) Adjustment of Cover Hook
1.
Push cover to check for play, and adjust if necessary.
Loosen cover stay securing nuts 1, adjust fit of cowl, and
2.
then, tighten the nuts.
Turn toward a to loosen cowl.
Turn toward b to tighten cowl.
3) Removing Bottom Cowl
1.
First refer to "Removing Power Unit" in Chapter 4.
2.
Remove power trim pump electrical cables from bottom
cowl.
There is a clamp on the back of bottom cowl for
securing cables.
3.
Loosen bolts that secures shift lever shaft holder.
7-14
1 and turn
1
1
2
a
b
TLDI 75/90C2 2010