Inspection Of Gear Case - TOHATSU MD 70-90C2 Service Manual

Remove taper roller bearing outer race w.
2.
Put the slide hammer in the gear case, hook claw of slide
hammer on the outer race to fix it, and slide the hammer to
pull out the outer race.
Slide Hammer Kit :
P/N. 3AC-99080-0
Confirm the position of insertion groove in the
back of outer race, and put the claw of slide
hammer in the groove.
This work can also be done by using the following tool.
Bevel Gear Bearing Puller Ass'y :
P/N. 3B7-72755-0

28) Inspection of Gear Case

Also check skeg a and torpedo-like area b for crack and
1.
other damage.
Replace if necessary.
TLDI 75/90C2 2010
olt, Needle
Roller earing Press
"F"Mark
Stopper
"F"Mark
Press , Needle
Roller earing
olt
w
w Outer Race
Do not reuse.
b
a
Plate C, Flywheel
Puller
Collar, Needle
Roller earing Press
olt
Guide earing
Outer Press
Rod, Needle Roller
earing Press
Needle Roller
Marking Face
O Ring
Washer
w
6-29
6