TOHATSU MD 70-90C2 Service Manual page 232

Cowl, Bracket and PTT Unit
3. Loosen and remove upper rubber mount cap installation
bolts to remove mount cap 2.
Drive shaft housing drops if mount bolt is
removed in this step.
4. Loosen and remove upper rubber mount installation bolts
to remove rubber mount 3.
Loosen right and left rubber mount installation
bolts in several steps alternately and equally.
Pull out lower rubber mount bolt 4 while holding drive
5.
shaft housing at its top and bottom securely, and remove
drive shaft housing.
7-16
CAUTION
3
4
2
TLDI 75/90C2 2010