Assembly Of Drive Shaft Housing - TOHATSU MD 70-90C2 Service Manual

Cowl, Bracket and PTT Unit

7) Assembly of Drive Shaft Housing

Install exhaust pipe 1 and gasket 2 to engine base 3
1.
and tighten bolts 4 to specified torque.
Exhaust Pipe Bolts 4 :
11 N · m (8 lb · ft) [1.1 kgf · m]
Install exhaust housing grommet 5 to exhaust housing
2.
6.
When installing the grommet by using adhesive,
clean adhering area to remove dirt and oil and dry
the area before applying adhesive.
1741
1741 1741 1741
Install exhaust housing 6 and gasket 7 to engine base
3.
3 and tighten bolts 8 to specified torque.
Exhaust Housing Bolts 8 :
15 N · m (11 lb · ft) [1.5 kgf · m]
7-20
1
4
2
3
5
1741 1741 1741
6
1741 1741
8
7
3
TLDI 75/90C2 2010