37) Installation of Fuel System
Refer to "Removing and Installation of Fuel System" in
Chapter 4.
38) Installation of Cord Ass'y and
Electrical Parts
Reverse cord ass'y removing procedure described in
"Removing Cord Ass'y" in Chapter 5.
39) Installation of Starter Motor
1.
Secure starter motor mounting band by using bolts (M10,
2 pcs.) on the upper surface of the motor, and then, install
starter motor to bracket.
Connect grounding cord to air chamber.
40) Installation of Alternator
1.
Tighten coil bracket securing bolts to specified torque.
Coil Bracket bolts : 1
6 N · m (4 lb · ft) [0.6 kgf · m]
2.
tighten alternator securing bolts to specified torque.
Alternator Securing Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
3.
Install other parts by reversing removing procedure.
TLDI 75/90C2 2010
5
5-51