Hoist power unit by using eye bolt e.
14.
Hoist power unit taking care not to catch wires
and hoses.
Eye Bolt r :
P/N. 3T1-72212-0
Remove 2-crank case bolts. Remove crank case head t.
15.
Put the tip of bladed screw driver in the mating
face of crank case head as shown to separate
from the engine body evenly.
3) Removing Air Compressor
Refer to "Removing Air Compressor" in chapter 4.
TLDI 75/90C2 2010
r
t
5
5-19