TOHATSU MD 70-90C2 Service Manual page 39

unctional Limit
hen parts are worn or damaged
hen parts no longer conform to standard values
hen parts no longer conform to standard values
hen parts are worn or damaged
hen parts show deterioration or contamination by fuel
hen parts are worn or damaged
hen parts are worn, damaged or stretched out of shape
hen parts no longer conform to standard values
1) 0.9mm (0.036 in)
2) hen electrodes show excessive wear
hen parts no longer conform to standard values
No clicking sound when 12 volts is applied to the terminal
hen parts no longer conform to standard values
hen parts are worn or damaged
No clicking sound when 12 volts is applied to the terminal
hen parts no longer conform to standard values
hen the resistance value between upper and lower connectors °½ or 0½
hen the resistance value between upper and middle connectors becomes
erratic
hen parts no longer conform to standard values
hen parts no longer conform to standard values
hen parts no longer conform to standard values
hen parts no longer conform to standard values
hen parts no longer conform to standard values
12 mm (0.47 in)
0.2 mm (0.008 in)
28 mm (1.102 in)
hen the fuse burns out
hen parts no longer conform to standard values
hen parts no longer conform to standard values
TLDI 75/90C2 2010
Action To Be Taken
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Repair so that parts conform to standard values.
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Repair so that parts conform to standard values.
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Replace with new part.
Replace if less than specified limit.
Replace with new part.
After repairing the cause of the burn-out, replace with a new fuse.
Replace with new part.
Replace with new part.
2
2-11