Show Ports - D-Link DGS-1100-16/ME Reference Manual

Restrictions
Example usage:
To configure the speed of ports 1-3 to be 100 Mbps, full duplex:
DGS-1100-24P/ME:admin#config ports 1-3 speed 100_full
Command : config ports 1-3 speed 100_full
Success.
DGS-1100-24P/ME:admin#

show ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration of port 5 on the Switch:
DGS-1100-24P/ME:admin#show ports 5
Command : show ports 5
Port State/
------- --------
5
DGS-1100-24P/ME:admin#
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Only administrator-level users can issue this command.
To display the current configuration of a range of ports.
show ports <portlist>
The show ports command displays the current configuration of a
port or range of ports.
<portlist> − A port or range of ports whose settings are to be
displayed..
None.
Settings
MDI Speed/Duplex/FlowCtrl Link Status
------------------------------------ ------------------- ---------
Enabled Auto/Auto/Disabled
Auto
Description:
Connection Address
Link Up
33
Learning
Enabled