Show Bandwidth_Control - D-Link DGS-1100-16/ME Reference Manual

Example usage:
To configure bandwidth control configuration:
DGS-1100-24P/ME:admin#config bandwidth_control 7-9 rx_rate limit 128
tx_rate limit 64
Command : config bandwidth_control 8-9 rx_rate limit 128 tx_rate limit 64
Success.
DGS-1100-24P/ME:admin#

show bandwidth_control

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the bandwidth control configuration:
DGS-1100-24P/ME:admin#show bandwidth_control
Command : show bandwidth_control
Port
------
eth1
eth2
eth3
eth4
eth5
eth6
eth7
eth8
eth9
eth10
eth11
eth12
eth13
eth14
eth15
eth16
eth17
eth18
eth19
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
To display bandwidth control settings on the Switch.
show bandwidth_control {ports<portlist>}
The show bandwidth_control command displays bandwidth
control.
ports<portlist> – A port or range of ports to be configured.
None.
RX Rate TX Rate
--------------- --------------
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
8K bps No Limit
8K bps No Limit
8K bps No Limit
128K bps 64K bps
128K bps 64K bps
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
No Limit No Limit
70