Delete Multicast_Fdb - D-Link DGS-1100-16/ME Reference Manual

Description
Parameters
Restrictions
Example usage:
To clear FDB entry of port 2:

delete multicast_fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a multicast FDB entry:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
The clear fdb command clears FDB entries by ports.
port <port> − The port number.
all – Specifies all ports on the Switch.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#clear fdb port 2
Command : clear fdb port 2
Success.
DGS-1100-24P/ME:admin#
To delete an entry in the Switch's muticast FDB.
delete multicast_fdb <vlan_name 8> <macaddr>
The delete multicast_fdb command deletes an entry in the Switch's
multicast FDB.
<vlan_name 8> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address to be removed from the multicast
forwarding table.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#delete multicast_fdb VLAN0001
22-ff-ff-ff-ff-ff
Command : delete multicast_fdb VLAN0001 22-ff-ff-ff-ff-ff
Success.
DGS-1100-24P/ME:admin#
66