Config Command_Prompt - D-Link DGS-1100-16/ME Reference Manual

Description
Parameters
Restrictions
Example usage:
To delete the default Gateway from the routing table:

config command_prompt

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To modify the command prompt to abc:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
The delete iproute command will delete an existing IP route entry
from the Switch's IP routing table.
default – Specifies to delete a default IP route entry.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin# delete iproute default
Command : delete iproute default
Success.
DGS-1100-24P/ME:admin#
Used to configure the command prompt.
config command_prompt [user_define <string 16> | username |
default]
The config command_prompt command will modify the setting of
command prompt.
The current command prompt consists of four parts: "product name"
+ ":" + "user level" + "#" (e.g. "DGS-1100-24P/ME:admin#"). This
command is used to modify the first part (1. "product name") with a
string consisting of a maximum of 16 characters, or to be replaced
with the users' login user name.
When users issue the "reset" command, the current command
prompt will remain in tact. Yet, issuing the "reset system" will return
the command prompt to its original factory default value.
<string 16> – Enter the new command prompt string of no more than
16 characters.
username – Enter this command to set the login username as the
command prompt.
default – Enter this command to return the command prompt to its
original factory default value.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config command_prompt user_define
abc
Command : config command_prompt user_define abc
Success.
abc:admin#
31