Save; Reboot - D-Link DGS-1100-16/ME Reference Manual

save

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:

reboot

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DGS-1100-24P/ME:admin#reboot
Command : reboot
Are you sure you want to proceed with the system reboot?(y/n) y
Please wait, the switch is rebooting...
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
22 Disabled
23 Disabled
24 Disabled
DGS-1100-24P/ME:admin#
To save changes in the Switch's configuration to non-volatile RAM.
save
The save command used to enter the current switch configuration
into non-volatile RAM. The saved switch configuration will be loaded
into the Switch's memory each time the Switch is restarted.
None
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#save
Command : save
Success.
DGS-1100-24P/ME:admin#
To reboot the Switch.
reboot {force_agree}
The reboot command restarts the Switch.
force_agree –When force_agree is specified, the reboot command
will be executed immediately without further confirmation.
Only administrator-level users can issue this command.
24