Example usage:
To disable DDP support
DGS-1100-24P/ME:admin#disable ddp
Command : disable ddp
Success.
DGS-1100-24P/ME:admin#
config ddp report_time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set DDP report time to 60
DGS-1100-24P/ME:admin#config ddp report_time 60
Command : config ddp report_time 60
Success.
DGS-1100-24P/ME:admin#
show ddp
Purpose
Syntax
Description
Parameters
Restrictions
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
To set the interval between two consecutive DDP report messages.
config ddp report_time [30 | 60 | 90 | 120 | never]
The config ddp report_time command configures report period of
the switch.
30 – Set report interval to 30 seconds.
60 – Set report interval to 60 seconds.
90 – Set report interval to 90 seconds.
120 – Set report interval to 120 seconds.
never – Set report interval to Never, the switch stops sending report
message.
Only administrator-level users can issue this command.
To display DDP setting of the switch.
show ddp
The show ddp command displays DDP settings of the switch.
None.
None.
138