Show Mld_Snooping Group - D-Link DGS-1100-16/ME Reference Manual

Restrictions
Example usage:
To display MLD snooping on the Switch:

show mld_snooping group

Purpose
Syntax
Description
Parameters
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
None.
DGS-1100-24P/ME:admin#show mld_snooping vlan_name
VLAN0001
Command : show mld_snooping vlan_name VLAN0001
MLD Snooping Global State : Disabled
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Querier State
Querier Role
Querier IP
State
Fast Leave
Total Entries: 1
DGS-1100-24P/ME:admin#
To display the current MLD snooping group configuration on the
Switch.
show mld_snooping group [all | [vlan_name <vlan_name 8> |
vlanid <vidlist 1-4094> | ports <portlist>]
{ipaddress<ipv6addr>}]
The show mld_snooping group command displays the current
MLD snooping group configuration on the Switch.
The group table shared with IGMP snooping. If MLD snooping and
IGMP snooping are enabled at the same time, the count of dynamic
groups that can be learned will be limited by the number of IGMP
snooping groups that exist (including static group and dynamic
groups).
all – Display all current MLD Snooping group configurations on the
Switch.
vlan_name <vlan_name 8> − The name of the VLAN on which MLD
snooping group configuration information will be displayed. Up to 8
characters can be used.
vlanid <vidlist 1-4094> − The ID of the VLAN on which MLD
snooping group configuration information will be displayed.
ports<portlist> − A port or a range of ports on which MLD snooping
group configuration information will be displayed.
: VLAN0001
: 125
: 10
: 2
: 1
: Disabled
: Non-Querier
: ::
: Enabled
: Enabled
112