Dgs-1100-18/Me; Front Panel; Rear Panel - D-Link DGS-1100-16/ME Reference Manual

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Power: The power port is where to connect the AC power cord.

DGS-1100-18/ME

16-Port 10/100/1000Mpbs + 2 Port SFP 1000 Mbps Switch

Front Panel

Power LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-16):
Solid Green: When there is a secure 1000Mbps connection at the port.
Blinking Green or Amber: Indicates that the Switch is either sending or receiving data to the port.
Solid Amber: Indicates that the port is running at 10/100Mbps.
Light off: No link.
Link/Act/Speed LED (Ports 17-18):
Solid Green: There is a secure 1000Mbps connection at the port.
Blinking Green: There is reception or transmission occurring at the port.
Light off: No link.
Reset: By pressing the Reset button until the power LED turns amber, the Switch will change back to
the default configuration and all changes will be lost.
NOTE: The MiniGBIC ports should use UL listed Optical Transceiver
product, Rated Laser Class I. 3.3Vdc

Rear Panel

Power: The power port is where to connect the AC power cord.
Figure 2-3 - DGS-1100-18/ME Front Panel
Figure 2-4 – DGS-1100-18/ME Rear Panel
3