Config Surveillance_Vlan Aging_Time - D-Link DGS-1100-16/ME Reference Manual

Example usage:
To set the surveillance priority 5:
DGS-1100-24P/ME:admin#config surveillance_vlan priority 5
Command : config surveillance_vlan priority 5
Success.
DGS-1100-24P/ME:admin#

config surveillance_vlan aging_time

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the aging time of the Surveillance VLAN to 600 minutes:
DGS-1100-24P/ME:admin#config surveillance_vlan aging_time 600
Command:
Success.
DGS-1100-24P/ME:admin#
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Configures Surveillance VLAN aging time.
config surveillance_vlan aging_time <min 1-65535>
To set the aging time of the Surveillance VLAN. The aging time is
used to remove a port from the Surveillance VLAN if the port is an
automatic Surveillance VLAN member. When the last surveillance
device stops sending traffic and the MAC address of this
surveillance device is aged out, the Surveillance VLAN aging timer
will be started. The port will be removed from the Surveillance VLAN
after expiration of Surveillance VLAN aging timer. If the surveillance
traffic resumes during the aging time, the aging timer will be reset
and stopped.
<min 1-65535> - The aging time to set, the range is 1–65535
minutes.
The default value is 720 minutes.
Only administrator-level users can issue this command.
config surveillance_vlan aging_time 600
146