Config Lldp - D-Link DGS-1100-16/ME Reference Manual

DGS-1100-24P/ME:admin#show lldp remote_ports
Command : show lldp remote_ports
Remote Entities Count : 1
Entity 1
DGS-1100-24P/ME:admin#

config lldp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure LLDP notification:
DGS-1100-24P/ME:admin#config lldp notification enable
Command : config lldp notification enable
Success.
DGS-1100-24P/ME:admin#
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Chassis Id Subtype : 4
Chassis Id
Port Id Subtype
Port Id : eth07
Port Description
To enable LLDP notification on a port or ports.
config lldp notification [enable | disable]
The config lldp notification command defines lldp notification per
system on the switch.
notification [enable | disable]– Defines if the notification is enabled or
disabled.
Only administrator-level users can issue this command.
: ec22804008df
: 1
:
125