Config Snmp Coldstart_Traps; Config Snmp Warmstart_Traps; Enable Snmp - D-Link DGS-1100-16/ME Reference Manual

config snmp coldstart_traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To turn on SNMP cold start trap support:

config snmp warmstart_traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To turn on SNMP warm start trap support:

enable snmp

Purpose
Syntax
Description
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-24P/ME:admin#
To configure SNMP cold start trap support.
config snmp coldstart_traps [enable | disable]
The config snmp coldstart_traps command configures SNMP cold
start trap support on the Switch.
[enable | disable] – Set the trap support state of the switch.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config snmp coldstart_traps enable
Command : config snmp coldstart _traps enable
Success.
DGS-1100-24P/ME:admin#
To configure SNMP warm start trap support.
config snmp warmstart_traps [enable | disable]
The config snmp warmstart_traps command configures SNMP
warm start trap support on the Switch.
[enable | disable] – Set the trap support state of the switch.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config snmp warmstart_traps enable
Command : config snmp warmstart_traps enable
Success.
DGS-1100-24P/ME:admin#
To enable SNMP support.
enable snmp
The enable snmp command enables SNMP support on the Switch.
46