The Zone Defense commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
enable zone_defense
disable zone_defense
show zone_defense
Each command is listed in detail, as follows:
enable zone_defense
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable zone defense support
DGS-1100-24P/ME:admin#enable zone_defense
Command : enable zone_defense
Success.
DGS-1100-24P/ME:admin#
disable zone_defense
Purpose
Syntax
Description
Parameters
Restrictions
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
To enable zone defense support of the switch.
enable zone_defense
The enable zone_defense command enables zone defense support
of the switch.
None.
Only administrator-level users can issue this command.
To disable zone defense support of the switch.
disable zone_defense
The disable zone_defense command disables zone defense
support of the switch.
None.
Only administrator-level users can issue this command.
ZONE DEFENSE COMMANDS
135
26