Config Snmp Linkup_Traps; Config Snmp Linkdown_Traps - D-Link DGS-1100-16/ME Reference Manual

Example usage:
To configure the Switch name as '10ME':

config snmp linkup_traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To turn on SNMP link up trap support:

config snmp linkdown_traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To turn on SNMP link down trap support:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-24P/ME:admin#config snmp system_name
10ME
Command : config snmp system_name 10ME
Success.
DGS-1100-24P/ME:admin#
To configure SNMP link up trap support.
config snmp linkup_traps [enable | disable]
The config snmp linkup_traps command configures SNMP link up
trap support on the Switch.
[enable | disable] – Set the trap support state of the switch.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config snmp linkup_traps enable
Command : config snmp linkup_traps enable
Success.
DGS-1100-24P/ME:admin#
To configure SNMP link down trap support.
config snmp linkdown_traps [enable | disable]
The config snmp linkdown_traps command configures SNMP link
down trap support on the Switch.
[enable | disable] – Set the trap support state of the switch.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config snmp linkdown_traps enable
Command : config snmp linkdown_traps enable
Success.
45