Show Time_Range; Config Telnet Auto_Logout - D-Link DGS-1100-16/ME Reference Manual

DGS-1100-24P/ME:admin#delete time_range dlink
Command : delete time_range dlink
DGS-1100-24P/ME:admin#

show time_range

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display time range settings on the Switch:
DGS-1100-24P/ME:admin#show time_range
DGS-1100-24P/ME:admin#

config telnet auto_logout

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Two minutes to set the automatic logout time:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Success.
To display the currently configured access profiles on the Switch.
show time_range
The show time_range command displays the time range
configuration.
None.
None.
Time Range Information
------------------------------------------
Range Name : dlink
Weekdays : Daily
Start Time : 10:10:00
End Time : 12:10:00
Total Entries :1
To configure the auto log out time on the Switch.
config telnet auto_logout [2_minutes | 5_minutes | 10_minutes |
15_minutes]
This command is used to configure the auto logout time for idle
connections.
2_minutes - Two minutes to set the automatic logout time
5_minutes - Five minutes to set the automatic logout time
10_minutes - Ten minutes to set the automatic logout time
15_minutes - Fifteen minutes to set the automatic logout time
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config telnet auto_logout 2_minutes
Command : config telnet auto_logout 2_minutes
28