Config Account; Show Account - D-Link DGS-1100-16/ME Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To delete an account named 'dlink':

config account

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of 'admin' account:

show account

Purpose
Syntax
Description
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
delete account <username 15>
The delete account command deletes an existing user account.
Users must delete a user-level account before deleting an admin-
level account.
<username 15> − the account username.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#delete account dlink
Command : delete account dlink
Success.
DGS-1100-24P/ME:admin#
To change the password for an existing user account.
config account <username 15>
The config account command changes the password for a user
account that has been created using the create account command.
The system prompts for the account's new password, which may be
between 0 and 15 characters.
<username 15> − the account username.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config account admin
Command : config account admin
Enter an old password:***
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-1100-24P/ME:admin#
To display information about all user accounts on the Switch.
show account
The show account command displays all account usernames and
19